Dahl87banshee

Pm replied

After some research on 2-1 intakes I found out the one I have for sale is a graydon proline 2-1. If that helps with the sale.. I'll take offers on anything just need to sell enough to pay my phone bill. Rough month just selling some stuff. Have a good day guys.

That's a good price for that motor.. Surprised someone hasn't jumped on it.. If you do part it how much for cylinders?

Have a stock head beat up and i don't know what the hell the spirals are in it for.. Might work but you can make the decision- Cover shipping and it's yours Set of reed spacers, very usable and in pretty good shape, not perfect but good- $25 + the very small shipping charge Stock carrier, good shape, have some new bearings I'll throw in but dont have the seals or the metal piece between the bearings- $10 + shipping 2-1 intake, nice shape, not sure on brand but seems pretty nice, the boot is for a 39 mm carb, was planning an MX build but just going to stick with two carbs- $60 shipped or $50 plus shipping, your choice Water pump to head hose- $5 + shipping? Offer if that's wrong If the pictures don't work through tapatalk text me and I can send you some. 7153141172 Any payments made add fees or 3% your choice.. Thanks for looking- Jordon

My girlfriends dad has the ambushes and they have held up great for him. I plan on running them too when my banshee is all back together

How much for one?

Did my buddy rattle can ray tell you that?

hahaha... No pistons really give you more hp. I didn't have good luck with Vito's at all. Maybe other people have. Wsm is a good cheap piston and wiseco prolites are probably the most well known reliable piston. Just a personal preference. I like namuras also

Looks great if I had the extra money I would jump all over it...... Lmfao not really.. Anyone wanna go 50/50 in on it and do an off-road drive-by like it was made for? Haha west side mo fo

Main bearings. Every used crank I have got the main bearings always seem a little to sloppy. Would like to know how much play is too much. Ive learned just not to trust used cranks if they don't seem right they probably aren't. Of corse that's just me. Maybe it's better then the ones I've gotten

Id look around for a set of ported cylinders to come up on here. Usually about 300-500 and then you have your port work that you will want in the future out of the way. Maybe post a wanted add for ported cylinders under 65mm

Walmart has Trojan, durex, and lifestyle. Pick the ones you like the most. Lmfao

I like how about 20 people said the same thing.. So I figured I best say it was lean too. Fit in a little more. Haha

Back in the market for +2+1 arms. Brand is not important to me, paint doesn't matter either. As long as they aren't bent or cracked I'm interested. I need the tie rods and and mounting bolts as well. Im not sure if my old j arm spindles/brakes/hubs will work with them either. So hopefully somebody knows? If my spindle set up won't work then id like to get a set that will with the arms. Anyways, they don't have to be pretty i just don't want them breaking on the first landing. Pm me or text me at 7153141172. Thanks, Jordon.

I don't understand asking on here if you will win. Just go race and find out. Also make sure to buy dg pipes. For sure the best pipes money can buy. Stock motor not even jetted for them got 127 hp on my buddy rattle can rays dyno. Insane

Good seller here guys.

I guess I never knew shock covers were top of the line... Must compress the springs a little more?

It will run fine but will hold back what it could do.

Shot in the dark here but I have a 1992 gmc k1500 stepside with a 6 inch suspension lift in the front and 4 inch blocks in the back. I'm selling the truck for 1600. It has some rust and a dent but runs pretty good. Has a 305 in it. It needs pads and rotors up front as well. I would trade it and maybe some cash for Hotrods 4 mil crank 115 mm rods with Serval with or with out pistons and a head to go with it. Would like the whole kit like on eBay, but like I said, depending on what you have I'll let go of it missing a few things I'd need. Mainly just want the crank and the serval cylinders. If the cylinders are used id like matching pistons. If you have the whole kit, I will throw in some money. I will drive to meet you within reason. I live by ladysmith Wisconsin. I could drive a couple hours to meet if it was a serious deal. Think it through and get back to me. Also may take a stock cylinder 4 mill set up for it but would like it complete and maybe a set of pipes depending on how nice it is. Text 7153141172 or call after 4:30 pm. Pics will be posted this afternoon.

Carbs sold

Cylinders sold. Thanks

Pm sent

Lol I don't care who gets them but at least you know what they are worth and respect that I know what they are worth. As for the carbs I didn't figure I would get much interest. Everybody wants bigger. Lol but hell I'd take a decent offer on them just to get rid of them. Hell I'd even take a trade for something maybe. Lookin for a 36-39 mm single carb, billet stuff, set of headlights, good coil, used clutch basket (mine has a broken tab), axle carrier in nice shape, pretty much anything of equal value or a little less then the carbs. Cylinders I'm looking to just sell.

Yeah I know. I Just planned on gettin rid of them pretty fast for the price and nothing. Gonna repost them for $150 next week if they aren't gone or sell them to trex for this price. Good guy. Works out good deals.

Like they are at 64.04. Pics to verify. If you wanted to play safe so the piston didn't have any slap I'd go .10 over and be perfect. I was also told they need porting. They don't need to be ported. Thats your choice. But yeah enough of me bitching about people. Boxed and ready to ship wherever. Text for PayPal Info or pictures