banshee_R1

sold

PM sent

I cant remember if it was Kevin or trinity that had a stroker package that was your choice of porting, crank, pistons, plates, etc Whole deal was like $1047

Dont even bother with a leakdown yet rebuild it!!!!

I was drunk.... Someday maybe

Na it was sleeper 06. He's a good sh*t

where and how much!!!!!

I say hold it for as long as you can and have fun with it in the mean time. wear it down you will still get the 2500 they are sayin, at least around here. you put $$ into it have some fun!!

I did the porting, but like i said im no pro. I got these specs from a buddy on this site

X2= way lean the piston is spotless. Looks to me like your lucky though.... could have been alot worse!!

Kinda figured it would be like porting with stock pipes

My cylinders that on on the bike are ported for a stock stroke crank is good and welded just looking for a little more

I dont have my profile updated but i have it all but the cylinders ported for a 4 mill and of course the pistons and crank

How do strokers run with stok porting

So im tring to decide if i shoulg get a stroker or send one of my extra sets of jugs in to get ported. The jugs I have on my bike now I ported myself they make decent power but im no pro. Right now i can do one or the other. I ride mostly woods and some track so I want low and mid power with a decent powerband and im already around 150 psi. I have no first hand experiance with strokers. Can I get some oppinions please, Thanks guys

Im strictly Amsoil. I mix 50:1 with it. My tranny usually has it too. Thou I used Gearsaver in there this time

Its a done deal.

clean the whole carb. IE all the jets

Simple question... Will the stock axle hold up to the added stress of reversing the wheels, and is it worth the stability tou get out of it?

I agree its like ordering sunglasses out of a book. Limited places around here have limited helmets, I went to the shop that gets me the parts for my buiseness and got an afx dual sport helmet. It has 13 vents that can be open or closed with a real nice mesh liner, padding is removeable and washable. It weighs 3.4 lbs I believe, lighter than the hjcs they had there and also the couple of fox helmets. It is a very confortable helmet, nice looking and for 100 bucks with my discount seems well worth it MSRP bout $130 Im going riding tomorrow ill let you know how it is

well yea. but you have to admit if our heads were hard enough to not need one that would be the sh*t

I know HJC designed their vents in an air tunnel. But my old one sucks. I was thinking about the ones that have multiple intakes and exhausts. I see there are some with 10 and some with 13. I even saw one on e bay that said it had 41, Wat a joke im guessin

I sweat like a pig. I need a helmet that has good air flow but doesnt cost 500 bucks. I Just got a o'neal rockhard slipknot helmet for fathers day Awsome graphics but looks like poor venting. It is a $250 all for the name on it. I need a helmet that looks good and has good flow. Any suggestions??

I got some armadillos