figaro

Brother I bought a lot of stuff from you and After reading this I will be buying this stator cover too cheers.

i like the design specially the glass water cover and light wight. will it be lighter then a stock cover ? i run a complete Hanson clutch i think it is stock number of plates so that means 8 plates but I'm not sure how many plates are in a stock clutch... can't wait to see this product any news yet ???

i already got several friends with raptors on my hit list when my shipment arrives

thank you guys. i will do the 31 ratio. my first day on the dunes with my banshee. i will be going up against some modified Raptors 700 and all i have on my bike right now are is K&N air filters with v force 3 reeds and t5 pipes . do i stand a chance ??

thank you all. I tried to look up info on how to convert liters to gallons and the oil mix but there was so much conflict in opinion on the ratio. also the US gallon is different then European gallon so that just added to the confusion. I got it now I am living now in Abu Dhabi it is close to Dubai about 45min that why we use litters. specialblend07 you are right my bro has the older GTR which is called skyline the new one is called GTR and it is left side drive. I think the one i have is a 2009 not sure though but the only difference i noticed is the rear break light gets brighter if i press the break and here is the linkage.

what is your point ? as I said before i spent 16k on parts before i bought the bike, which means i did not have the bike and don't know what full mix or engine oil it takes... here is another guy on eBay that spent 18K on BANSHEE and from what i can tell i have more modified parts then him. http://cgi.ebay.com/ebaymotors/2000-Yamaha-Banshee-Custome-Built-/200692159245?pt=ATVs&hash=item2eba2f530d enjoy

this may be a silly question but I bought a 2009 Banshee and don't know how many liters of premix oil in 5 gallons. also how many liters of engine oil should i put in ?? thank you guys

I bought a 2009 Banshee in mint condition for my project bike it had only been ridden 3 times and it has v force 3, K&N air filters T5 pipes. However, I'm still waiting on my parts that are on the shipping container that will arrive some time in Jan. I also found a bike shop that will dyno my banshee and tune it with my R2 Pipes over here they still sell the banshee brand new 2010 last edition for 6k US !!! I'm thinking of buying it and just keeping it in storage what do you guys think.

I enjoyed this grammar lesson BHQ you guys are the best

this is great thread i cant wait to build my serval 4 mill 421cc. i have all the parts and CAMATV and BHQ friends helped me buy the right parts. If i was not going over seas my motor and all the including the bike would be built by camatv he is a great guy and knows his stuff. I wish i got a gear mode like you did gunsforchildren . I only bought the stuff that didn't need machine work like the shift star and the moded drum cam. i got a full hinson clutch kit no lockout. 2 lectron carbs 38mmH/V and V force 3 reeds match ported from wicked and wicked billet intake with crossover "i hope it doesn't leak". and off course R2 pipes. Guns are you going to Dyno your serval ?

I don't know about people but i wont pay that lol. the guy from wicked told me it is expensive because it is a complete kit with pump and all but he also said that this is the kind of tool shops use not individuals. thanks for the input bro i have a 4 hour exam tomorrow so i will be hitting the local utilities shop on Saturday and put this baby together

I called up Wiked and they said it would be about $250 for the kit so i will just build it myself but I have a crazy busy day tomorrow but i will buy them on the weekend thanks

Well I will bbe leaving overseas in 5 days so there will be no wall mart and I don't know anyone over there with a banshee. So I guess I will just try and improvise

where can i buy one of these kits ?

what difference does it make if the swing arm is extended or not ? i have a +4 swing arm(servel 4mill 421cc) extreme 10 blade and also edge 8 blade but have not tried them yet as i am still building my bike.

I just got the go pro hero 2 full HD HD HERO2 Motorsports Edition LCD BacPac™ Battery BacPac™ 32GB SD Memory Card (Class 10) I will leave a detailed review on the go pro 2 with its accessories. I mainly ride in the desert so that's where i will test it and i will try and mount it on my helmet or bike but i will have to finish building my banshee first. btw the gopro 2 shows when it is recording by a flashing light so those who say they don't know when it is recording are either mistaken or maybe the older version didn't have the flashing light feature.

thank you all fro your comments and suggestions. i final received yesterday the full Hinson clutch

Thank you for taking the time to start this thread and for wanting to share with us the dyno info. I have been watching this thread since you started it and cant wait to see your numbers. I will also post my numbers once I have my bike and when I can find a dyno in the country I'm going to. I have a serval 421 4mill on R2s and lectrons 38mm H/V with 13" k&n on wicked match potted v force 3 reeds billet cross over intake. Good luck on your dyno run and keep us posted

thanks. what about the cascade clamps ? http://67.199.65.66/cascade_innovations/newlook/store/store_View.cfm?STORE_AREA_ID=3&store_dept_id=16

thank bro they where well worth the wait and thank you for recommending them. I cant wait to start the build i just need to find the right bike and shop down in Dubai. do i need any clamps and do they leak ?

I got the R2 today and the chrome job is amazing Thanks Tom

no worries bro I actually like them and will keep them until i install the battery kit and stator btw i just bought a grill from JDS similar to yours. are you using LEDs to light your front grill ? if so let me know where to get them from