bansheeboi

ok send info

if no cracks in the black tank cover i will take it or if its bad i will take the other one so how much for one of then shipped 31331 thanks

it is a brand new chain im going with bigger

this is my problem the bike has a stock carrier stock swinger and stock length chain now the carrier is all the way back to were the bolt line straight up and down and the chain is still very slack very slack also this carrier has a very small sprocket on it im think i change back to stock the size of the sprocket will take slack and therefore forceing me to adjust the carrier fwd and then adjust chain tensioners if im wrong let me know will post some pic tomorrow http://m1226.photobucket.com/albumview/albums/bansheeboi95/Mobile http://m1226.photobucket.com/albumview/albums/bansheeboi95/Mobile

good guy thanks

a+ seller thank guy

http://m1226.photobucket.com/albumview/albums/bansheeboi95/Mobile%20Uploads/2011-04-21_225257.jpg.html?newest=1&pbauth=1_uLEBonVPfaLdh1h3YMYz2arFK%2BYBE24tvGiOrKJHK5SpsZcn3ZcxEPHmboGw1KXWRcJPADdqYAwU7qx4bWOvJ6gA%2B7Jcm3YFcKulo6mXHVKqhuePSdQINyFEZbAXrTQCMHtp30dJGtZ98PCnSIuaXkId%2F1P4vKgoogWA0kt7k6w%3D http://m1226.photobucket.com/albumview/albums/bansheeboi95/Mobile%20Uploads/2011-04-21_224912.jpg.html?&newest=1&tr=next&pbauth=1_uLEBonVPfaLdh1h3YMYz2arFK%2BYBE24tvGiOrKJHK5SpsZcn3ZcxEPHmboGw1KXWRcJPADdqYAwU7qx4bWOvJ6gA%2B7Jcm3YFcKulo6mXHVKqhuePSdQINyFEZbAXrTQCMHtp30dJGtZ98PCnSIuaXkId%2F1P4vKgoogWA0kt7k6w%3D http://m1226.photobucket.com/albumview/albums/bansheeboi95/Mobile%20Uploads/2011-04-21_224849-1.jpg.html?&newest=1&tr=next&pbauth=1_uLEBonVPfaLdh1h3YMYz2arFK%2BYBE24tvGiOrKJHK5SpsZcn3ZcxEPHmboGw1KXWRcJPADdqYAwU7qx4bWOvJ6gA%2B7Jcm3YFcKulo6mXHVKqhuePSdQINyFEZbAXrTQCMHtp30dJGtZ98PCnSIuaXkId%2F1P4vKgoogWA0kt7k6w%3D brand new in the box guys 90+ ride not sure on carb size but it does come with manifolds and bolts fresh never mounted let me know shoot some offers and pm me thanks for looking hope i did it right

still have them?

I talked to the guy for the rockets pipes yesterday and he said that they have pipes ready they just have to finish welding something on them and the black one are coming out in a powder coat the can take the heat the ceramic didnt make the test chromes should be ready by next week along with the black one also i got to get a pair

you guys might wanna check busco beach on youtube it looks like everyone should bring both sets of tires for trail or drag or sand if thats what you you wanna do

pm sent on silencers very interested

i got some i'm taking off in the morning if you want them pm me thanks

send me paypal info will you take 20 shipped for handle bar?

will you sell just the silencers?

whats the lowest you will take on a set?

im hoping to have my bike together buy then hope i get to ride with and meet alot of you guys

let me get some pics of those fmf pipes to [email protected]

can i get pics of the vf3 to [email protected] and how much shipped to 31331

I want the pipes and the air filters and the hand grips

yes im sure as long as there is no water in system bike will crank and run fine soon as u put water in it the piston go swimming again going to pull topend this week and let you know what the bottom looks like

ok guys when i first got this bike i cranked it for the first time to see how she run i notice while running that water was leaking from the head over the left pipe so i change head gasket but upon changing i notice that the right piston or the drive side piston had like a brown pudding like stuff sitting there guys what is that? also i notice that water is running down the cylinder walls even into the ports also. i have not remove top end yet just dryed and blow clean the gue off the piston so now i notice that if no water is in the motor bike will run now you fill with water after replacing gasket plugs and fresh gas bike will not run plugs are wet again im thinking of just pulling the top off.

sent you a pm

$90 work for ya?

he is one of the coolest guy on this site this man service is the best thanks guy!!