brock42

I just recently bought a 2005 banshee and it had the tors delete already done. But whoever did it never drilled, tapped and installed the idle screws the hole is just filled with silicone. Would you guys happen to know why this would have been done. I know it's not right but just curious as to why it would have been done and will it hurt anything if it stays like that.

Is the rear bar and brake light still available.

Txt me 205-496-0710

I'm looking for a banshee transmission.

I'm running Yamalube premix with 93 octane gas carbs have stock jetting. And I'm not sure on elevation I'm in Tuscaloosa al. Has the stock air box with lid. And stock filter.

I have a 2006 banshee all stock except bills pipes and it is popping a little when I shift is this a jetting issue. Thanks for any help.

Ok thank you that's what I figured I was just going to make sure. So they need to be ran down to the back of the motor.

i was in the process of puttin my motor back in my banshee and saw two black hoses one coming from behind the motor mount and the other coming from the top of the transmission and was curious as to whatg they were thanks for any help

Alrighty thanks for the help

What's oil is everyone using for the transmission.

Text me 205-496-0710 I'm interested

i got some 32' silverbacks on ss312. Brute force dyno jet power commmander and a 2' lift and some other odds and ends ill trade ya

shoot me a text man and well work out something 205-496-0710

whTA what up man what you looking to get for your ps3

yeah thats what i had figured just got off the phone with jeff hes gonna call me back and we gonna see if we can get her fixed up thanks for all the help man

thanks for all the quick replies makes everything simple gonna call fast here in just a sec and talk about some settups thanks once again for all the help

im from tuscaloosa alabama im new to all this stuff i just want a good reliable setup that will smoke a@@ when it comes down to it i know im gonna have to have the cylinders bored does this guy have some contact info i could call and talk to him about it and how fast are the 4mil compared to like a 450 and raptors

alrighty ive heard alot of talk about the 4mil stroker would i gain some more power and torq with a 4mil

aight the guy i bought it from hes been working on atvs for a while and hes always messed with banshees i was gonna let him rebuild it just wondering what motor setup to go with how would i get one of the site spoinsors to do it do you send the motor off and whats the price range on rebuilding

alright guys i came across a 2006 special edition banshee with a set of bills pipe reeds and reed spacers boost bottle all that good stuff it was pretty much brand new and hadnt been rode hardly any i paid the guy 2000 for it rode it one time and held it wide oped for a little too long and gonna have to rebuild top and bottom end i do mostly trail riding and a few races here and there so what should i do the rebuild to any suggestions thanks for any advice