bansheeboy44

21cc domes on mine

I have a drag port 421 with 39's and everything else the same and I am running 55 pilots and 185 mains at Glamis

I can't wait any longer- me and 4 buddies are heading out to Gordon's tomorrow evening and staying until Saturday or Sunday. Ride early morning until it gets hot and then again in the evening/night

I prefer the squeeze bottle version- easier to apply

How did this event turn out?

Doug at D&M knows his chit, but obviously buying anything used is a gamble. Doug is easily reached and is here in the Phoenix area and is also who built my bike.

X2

Can you run one with a 15 tooth front? Also, do you remove the plastic thing held by 3 little screws when you install it or does the saver go over it?

Because of the thicker blade do the extremes hinder the tire growing at top RPM's though? I've had a couple of shops tell me they do (meaning haulers have more top end), but not sure if they just wanted to see the cash register open and have my cash go in it OR if there is some truth to this. I'm sure it's all relative though depending on sand conditions, distance of race, etc. But again, I flat drag at Gordon's and Glamis and also at the hills at both locations.

If I buy SLS Triple Buff paddles, which are better for my 4mill drag port cub? Will be used 50% of the time at the sand drags at Glamis and Gordon's and 50% at the hills. Let me know what you guys prefer and why- Thanks!

We didn't pull in until friday early afternoon, but it was the same- empty

which part of gordon's? I was there the weekend of the 6th and the whoops were deeeeeeeep

I assume it's a drag bike based on the length of the swinger and the previous paddles being ran- i'd say it depends on whether you're running flat drags or at the hill and your weight compared to the previous owner.

I'll be out there, but not sure if my banshee is going. Will depend on whether my suspension gets done in time. If not I'll be on my black yfz 450 with a Rossier pipe. I have a silver lifted dodge and a white enclosed trailer. Swing by and drink a beer

Ya on my first banshee w/ T5's and a pro design foam filter I was running a 290 main. Just to be safe try a 310 and work your way down.