Wheelman Chassis

well your other stock motor ran good joe, so y another stock cyl.? the bike im running for the ice this season is a 90" ridgid frame with my new 10mm cub, the frame is actually jts (badassbanshee479). we through it togeather for the ice while his motor is down for repair. my new frame for sand will be my own single a arm setup, i am planning to build a kit that the average guy with some welding exp can build himself in a garage and have a lightweight very competitive single arm drag/shooter. i will have a write up and picks soon as the project begins, i have some design changes that i have not seen before. whens the bike going to be done joe??

that would be sweet jr, i have a light jockey for mine lol. white lake is deff. closer than anchor but ill go where the bikes are.. i love the 10 cub its a beast. ive been dialing in the setup last cpl days, carbine can you let me know when there is some racing?? also how long and what days and time is everyone out there?

these arms will take any shock as badassbanshee479 said i have had dual rate elkas on here and they worked awsome. these are drag arms, however im a 280lb guy and they made 70 mph passes at silver lake no problem. very durable but not trail arms! make somwe offers never know........ may trade for some oof bb shearers.

hey would you trade for a set of bb inframe shearers?? very nice one tiny dent not seen when on.. thanks

was hopimg we would have good ice for x mas weekend....... tested my bike out last night, pulled and hooked so hard i thought my wheelie bar was gunna snap. even with a 90 inch ridgid i cant belive this 10mm cub pulls the front end right up..... wish i could find some video of quad drags on the ice hope to see ya guys, jd and joe what are you guys building??

price drop $350 shipped

hey guys, thanks for the good words jd i cant wait to ride with ya again... i built a nice 10mm cub to move my big ass...lol lilguy, someone mentioned buying the arms with no spindles if they do ill sell the spindles for $100 shipped. these are sweet arms im going single arm chassis these have to go..

hey guys i have a set of stock width +3 forward stellar drag arms, like new , with bushings. also the matching drag spindles and tierods. powder coated sparkle silver witha clear on top. price slashed!!! 350 shipped for everything

hey guys planing on doing as much ice draging as i can handle this winter.. i was hping to meet up with a group from michigan if theres a few that want to race.. ill be running a 10mil cub on alky in a 90 inch ridgid chassis, 50sum picks per tire....

i have a 10 cub an alky, 300 ft. 1-5 n down im 270 lbs 39mm pwk pumper carbs all the way, easy to tune, great throttle response. tons of info on them here also. my setup is 39 pwk,.118 mains, 60 pilots, pumper stock needles in the middle clip with a .015 needle shim, .125 hole power jets-2.25 turns out at 60 degrees black mikuni pump 65liter,, stock bowls. chris

i just built a new 10mm cub and set mine at .055... you will be fine..

lol no mis print, i have it in a trade i think but if it falls through its still for sale

prices droped....

cylinders sold obo on all others lets deal i need a new chassis lol

hey i just got up, night shift sucks lol im going to check the boost port now. paypal is [email protected]

hey i do still have the crank, 315 shipped to you. let me know thanks chris

hey i did not get your call or message sorry im home and off work tomarrow, call any time. yes i will do 200 shipped to you, yes i take paypal also as long as you gift me the money so i dont get charged. ill shipp them tomarrow if we make a deal, thanks again.

ok for the specs from the deck surace of the cyl. the exhaust port is: 1.135 inches down bottom of port is 2.165 down main transfers are: 1.670 to top and 2.165 to bottom sec transfers are: 1.663 to top 2.185 to bottom intake ports are: 2.970 to top and 3.905 to bottom with the pistons included and no base gasket the pistons stuck aprox. .070 out of the cyl. the domes that where in this setup were wrong so i have no squish info ore base gasket/ spacer info. hope this helps thanks chris

i work nights so its 3 somthing in rhe am now ill grab your numbers in the am for you, the bore is ok to run,there are some marks up and down that will not effect anything, the pistons show detination which is hard on the ring gaps. these where running like i said, the guys squish was all jacked and he was having issues with o rings in the head. if i was doing the motor id replace them for peice of mind. i will stand by all my parts 100 %, however you are responsible for the setup like base gasket thikness, domes , squish, all the builder crap..lol im selling a good useable set of cylinders, the pistons and extras are just through ins.. use them at your discretion. anyone that has done deals with me will confirm im a strait shooter, i give the most accurate info i can and stand behind my stuff. thank and call if yo would like 1734 679 6735 chris

yes sir for 200 i will include the pistons, cylinder, wrist pins and wrist pin bearings. the pistons show som detonation but where running fine.

hey, i am located in belleville michigan. right at the i-94-i-275 crossing, i see your in roseville, i work at diamond racing pistons in clinton township 15 mile and gratiot we could arange a meeting if you would like thanks

prices droped i have a hot rods 4mm ,115 rod crank that is out of my own personal bike im going 10mm . it is in good condition and perfect runable shape. no pics of the crank because the lower half is still in the bike i sold a guy who was running these stock cyl. my cub topend , so the crank i did not pull yet. $250 firm also a set of 68mm big bore domes alil rough but could be polished up and ran, they are 22cc (pistol not for sale haha) $10 aslo for sale a set of like new STELLAR +3 forward stock width drag arms and spindles including tierods and all heims, powder coated mat. silver. im going to a single front a-arm chassis so no need for these $400 all prices are obo and do not include shpping or paypal fees. thanks chris

ok guys im taking offers on the arms and crank let me know what your thinking. this stuff needs to go so i can get my chassis done....

thats a good reason, i love my ss silverado a bigger motor and alil n20 nakes it a real fun truck..