Jump to content

Boosted GMC

Members
 View Profile  See their activity

  • Posts

    21

  • Joined

  • Last visited

 Content Type 

Everything posted by Boosted GMC

  1. Boosted GMC
    Make sure you did not switch you'r float bowls. The LH float bowl has a passage that feeds the starter jet and supplys extra fuel when the choke is applied. I switched mine when I cleaned the carbs and had a hard time starting it when it was under 50 degrees. Try a 330 main needle in the middle position and a 27.5 pilot jet.
  2. Boosted GMC
    That heat shield says it needs a 1 inch air gap between the heat source and the mat. I don't think you can move the pipes out that far with out the mid pipes hitting the frame.
  3. Boosted GMC
    Payment sent!
  4. Boosted GMC
    I'll trade you a borg s488 with a polished race cover, a 1991 olds cutlas calais with a blown Quad four and a go at my old lady for that 01.
  5. Boosted GMC
    Bad enough i took the tank off and put the stocker on. I thought about spacing it out it would need at least 3/8 of an inch. I didn't want to take any chances, hate to melt a spot on a good tank.
  6. Boosted GMC
    The R2s hit the clark tank. My tank looks just the the one in the picture above and I had to put the stock tank back on.
  7. Boosted GMC
    I will be down there sometime this weekend. I usually park in the daytime parking at the south gate. Look for a 2009 lime green teryx and a 2001 blue banshee. I want to try out the teryx in the snow!!
  8. Boosted GMC
    I'll be there if the weather is good. I would be there today if I could get my crew rolling.
  9. Boosted GMC
    I have the chariot cages, head and timming plate on my herr jugs dune ported engine. I am very happy with the quality and performance of all these parts. I will continue to use there parts whenever possible.
  10. Boosted GMC
    I'll give you 200 for them if you send me you're paypal info.
  11. Boosted GMC
    Are the bearings and seals good in the rad carrier? Do you have any pics of the carrier?
  12. Boosted GMC
    K@N pods and v force reeds on a bike with stock pipes.
  13. Boosted GMC
    I sold my 89 banshee for $3300. All it hat was black t5s and a top end port job. Prices will very according to condition and location. I would like to see some pics.
  14. Boosted GMC
    Saturday at the little sahara my dyna fs cdi quit working. I put the stock cdi back on and it started on the first kick as usual. I was wondering if anyone has sent there cdi in for repairs and what it cost. I tried to call dynatek today, sat on hold for close to an hour.
  15. Boosted GMC
    We will be in the daytime parking at the south gate. I have a blue banshee and a 400ex, my buddy has a blue rhino with long travel suspension and king shocks.
  16. Boosted GMC
    My LSR A-arms use 16mm by 1.5 thread pitch ball joints. I got all four of them from american star for $98.00 they are a direct fit. Someone on here sells them for about $20 each if you do a search you can probably find his info.
  17. Boosted GMC
    Are all fattys the same or is the Y45 a special pipe? I recently bought a banshee with fattys and was thinking of getting T-5s, but I may keep the fattys now.
  18. Boosted GMC
    I'll be down there if the weather is nice.
  19. Boosted GMC
    The number for the bearing is 6902RS you can get 2 for $6.95 on ebay with free shipping. I bought one of the drums from vegas jeff and the bearing was a little rough. I plan to replace the bearing before installation.
  20. Boosted GMC
    I am looking for a good output shaft. I just bought a banshee and the threads are stripped where the sprocket nut goes. I also would like to find a set of 28pwks.
  21. Boosted GMC
    I have a buddy with a set of those lrd adjustable pipes with a stallworth port job. We played with them you can feel a slight difference between all the way in and all the way out.

BHQ Quick Links

×
×
  • Create New...