Schweet97Z

What stator are you using? Sent from my iPhone using Tapatalk

Sent you an email Sent from my iPhone using Tapatalk

What's the last two pics? Doesn't look like a pilot jet to me. Pilot jet you will need a small flat head and it needs removed from here.... http://www.dfn.com/agservices/Meatpic3.jpg Sent from my iPhone using Tapatalk

Stock jets Pilots - 25 Mains - 200 if I remember correctly Sent from my iPhone using Tapatalk

Buy a carb sync tool it's a must have for any banshee owner. Take the bowls off the carbs and unscrew the main jet and pilot jet. Look at the numbers on them and report back. Carb issues can def cause it to act this way. In fact had a similar issue with my 04 when I got it. Jetted properly and synced carbs. Boom ran like a champ. Also go on YouTube and look for South Texas Banshee. He has a lot of step by step videos that will be very helpful to you. But definitely get a sync tool. Sent from my iPhone using Tapatalk

The plugs look wet but rightfully so if it's not running right. What is your jetting and are your carbs synchronized? Run through your carbs. Clean them set your float height and sync them. Why the FMF stickers on there? Did the bike previously have aftermarket pipes on but wasn't jetted accordingly for factory pipes? Sent from my iPhone using Tapatalk

Bump Sent from my iPhone using Tapatalk

Start simple and work your way through the list. Figure out what cylinder isn't firing. Check spark. Make sure it's getting fuel. Make sure plug isn't fouled. Report back Sent from my iPhone using Tapatalk

Pro Taper Yamaha Bends Sent from my iPhone using Tapatalk

Btw I have stock bars with fresh powder on them. Shoot me a PM if you want em. Sent from my iPhone using Tapatalk

Stock ones. [emoji106] Sent from my iPhone using Tapatalk

That's why I went with SLP's I felt they are in the middle between T5's and CPI's. From the Dyno graphs they hit hard and wind out further than T5's. You might want to consider a set. Sent from my iPhone using Tapatalk

Here's the thing. You're asking a fortune for a quad and trying to lead people into believing its 100% original and unmolested which in fact that's far from the truth. Post up the VIN on the frame. Come way down on that price and I'll buy it off you. Sent from my iPhone using Tapatalk

They are two completely different pipes. Just an FYI. I just sold my T5's. Sent from my iPhone using Tapatalk

I actually ended up going with some SLP's from JD. That being said I will still buy a set of CPI's if anyone does have them. Sent from my iPhone using Tapatalk

Look at the shiny banshee pipes laying on the ground to the right. If you will take a realistic price for that "original" POS let me know. I can be to you in 2 hours Sent from my iPhone using Tapatalk

Top notch seller. Top notch items. Great all around guy. Nobody should hesitate to buy from him. Thanks again for the carbs Ted. Sent from my iPhone using Tapatalk

UNI Filters Stock Box - NU2297ST 26-28mm Carbs - UP4182 - Pre Filter - OUTERWEARS 116107 - Filter Dimensions 3"x4" 32-34mm Carbs - UP5229 - Pre Filter - OUTERWEARS 116122 - Filter Dimensions 3"x5"

BTW I got 2 of the RU-1090's for $86 Total with Prefilters. It beats $130 everyone is asking for them. PM me if you want to know where to get them from.

For anyone else looking, It took alittle time but I have it figured out. Stock Air Box w/ Adapter Plate - YA-3502 - Pre Filter - YA-3502DK Toomy Stock Carb 2into1 Manifold - RU-0880 - Pre Filter - **OuterWears 20-1126-01** Stock Carbs - RU-0210 - Pre Filter - RU-0210PK - Filter Dimensions 3" x 5" Stock Carbs - RU-1050 - Pre Filter - RU-0520PK - Filter Dimensions 3.5" x 6" 28mm Carbs - RU-1070 - Pre Filter - RU-0520PK 33-35mm Carbs - RU-1080 - Pre Filter - RU-0510PK - Filter Dimensions 3.5" x 5" **10 Degree Flange Angle** 33-35mm Carbs - RU-1090 - Pre Filter - RU-0520PK - Filter Dimensions 3.5" x 6" **10 Degree Flange Angle** 38mm+ Carbs - RU-1770 - Pre Filter - RU-1470PK - Filter Dimensions 3.75" x 6" **20 Degree Flange Angle**

Thanks buddy but I can get real good deals on the K&N's I just can't find the part numbers Sent from my iPhone using Tapatalk

Does anyone know it off the top of their head?

Sent you a PM Sent from my iPhone using Tapatalk

Did Minkia38 move to NY? Lol Sent from my iPhone using Tapatalk

^ Jelly. I'd love to try dunes someday. Have fun and be safe. Sent from my iPhone using Tapatalk