rubeat

Do you still have these for sale? Tried pming you but wont work thanks Mike

I have no porting, +4 timing, and carbon fiber reeds on stock cages.I'm about 400 ft above sea level and was jetted at 320 mains and 27.5 pilots with stock carbs and k&n pods.I thought my jetting was perfect I could be wrong.But the thing was a turd with the fattys on it. I put my old pipes back on and never changed the jetting or anything and the power was right back.It just started a little harder until i changed the pilots back to 25s and jetted back up to 340 on the mains. Maybe im missing something else i hope not because i sold them already. Are the old mid top pipes that good of a pipe? Thanks Mike

I have a old set of fmf mid top pipes on my shee and i thought maybe a set of fmf fattys would be better.I put them on and they killed my shee threw the whole powerband.I rejetted and changed pilots when i switched.It is totally lazy slow reving.Put the old pipes back on and the power is all back so nothing else is wrong.Has anyone ever done back to back tests like this and what results? I was shocked how much the power fell off with the fattys.I was thinking about getting a set of t5s but dont want to spend the money if they run like the fattys do.Thanks Mike

I have a old set of fmf mid top pipes on my shee and I thought maybe a set of fmf fattys would be better. So i tried a set and they killed my shee.I rejetted and changed pilots when i switched.They made my bike totally lazy, slow reving to the old pipes.I was shocked it sucked in the whole powerband with the fattys. I was thinking about trying a set of t5s but dont want to spend the money if they wont help. Has anyone else done back to back tests before with these pipes? I put my old fmfs back on and the power is back so i dont think anything else is wrong. Thanks Mike

I have a 2002 Dakota Hradtail dragster roller with transmission for sale.Here is a list of some parts on it.$8500 Sbc motor plates Fabricated 9" housing Strange aluminum center section 5.42 gears Wilwood disc brakes Weld alumastars front 32x14x15 hoosier slicks 15 1/8 mile passes Dynatech coated sbc headers D-shaped and butterfly steering wheels Autometer gauges 21 inch cage (fits 6'240# driver) Msd 8al3 Helmet bars Helmet hook Glove box Parachute Shorty powerglide 1.76 low gear set, turbo splined input shaft,protree brake deep pan with shield.Trans is apart now but will be fresh when sold.

More

Heres pics

I have a brand new set of 28mm mikuni flatslides i want to trade for a decent set of toomey t5s. They dont have to be perfect.

Is it worth the time and money to switch from stock carbs to 28mm mikuni flatslides.Is there that much of a performance gain?Or should i just wait and get something bigger later?Im going to use these on a shee that i horseshoe drag.Need it to accelerate as quick i can thats why i thought the 28s would work good.Still new to this stuff always drag raced cars before.Just want some opinions. Thanks Mike

Can someone tell me where to order the needles and pilots and jets for these carbs? Thanks

Ok thanks

I thought they would but wasn't for sure.Do you like your 28s?I know they will take the stock 26 main jets but will they take the pilots? Thanks

Will a tors removal throttle cable kit work on these? If not can someone give me a link to a throttle cable that will work. Thanks Mike

Great seller fast shipping.

I have a set of the fmf mid top pipes and i bought a set of fmf fattys and put on thinking they would be better. I rejetted and changed pilots and my old fmfs would still spank the fattys everywhere in the powerband if you ask me. Has anyone tried these back to back? I couldn't believe the difference I was shocked. Thanks Mike

Have a set bought thanks everyone. Mike

Anyone have a set of fattys or prociruits for sale.Dont want anything real nice. Just going to use on a trail bike i'm wanting to build for a spare ride. Thanks Mike

Great seller fast shipping

I need some pilot jets for stock banshee carbs. I need 27.5 and 30s? Cant get them though my local yamaha dealer. Thanks Mike

Great seller/buyer and fast shipping does what he says. thanks alot

Post feedback here thanks

Looking for a cool head need studs and orings and head i have 120 dollars to spend. pm me thanks

Thanks alot guys i will give it a try.

Do any of you run it and have any bad things to say about it.Guys around hear say not to run it in a 2 stroke.They say oil wont mix in the fuel right. thanks

I have a set of pipes like these are they any good or should i try to find something else? Thanks