kubitza123

Paddles $425 shipped need these gone front black spindle mounts and new buff tires $300 shipped or package deal if some1 buys both $675 shipped

Thank you as well Jason

Stuff thats left and FORSALE Lockup and cover polished with billet water pump cover ,billet dipstick,and water pump complete like new $350.00 shipped 1-4 N DOWN override trans 45 min on it like new $350.00 shipped Will come compelte with forks etc complete topend full drag port from FAST with coolhead,domes,upp intakes,custom reeds,pistons etc $700 shipped OBO very fast setup FAST flame stator cover like new $185.00 obo cost $300 new I'll try and have the motor torn down by wed. i have people interested once i get pics in the cases ,crank,basket,straight cuts etc If theres something you need just ask me i'll let you know if i have it and a price CARBS SOLD PAYMENT PENDING

http://s232.photobucket.com/albums/ee248/x973788/ PICS IN LINK I tried swapping my ashalt tires on them but didn't like the look so the black spindle mounts will come with the new smooth buff sand tires. $325 SHIPPED OBO THESE ARE FOR 5/8'S drag spindles or bearings could be change to fit stock i believe? Rear 15 paddle extremes with black wheels 45min run time like new $475 shipped OBO Polsihed split direct drive wheels with asphalt tires like new $325 shipped obo FOR BANSHEE STOCK SPINDLES OBO need these gone possible trades for 1-5 or 1-6 override in ex shape or? Prefer sell but if you have a trans i need one of those

I have been busy guys sorry for late replys. I was driving 13-14 hours yeasterday picking up the new 10mill cheetah. The chassis, fiberglass,rear brake res,radiator,throttle,shifter,brakelever,coil and wires are all SOLD. Whole rear end with swinger probably sold waiting for a reply. Some1 is interested in the motor complete waiting to hear back from him before i tear it down. Every1 who has e-mailed me on motor parts if i told you that you had first dibs you still do unless this guy buys everything complete i will let you know ASAP because if he doesn't take it all it will be getting torn down first thing this week and i will send every1 pics etc of what they were interested in.

pm sent

Any parts i do not list i have some1 interested in i will post them if the deal falls threw these are what i know of as of right now forsale. Billet kicker with chrome base complete $85.00 shipped obo 4mill Wesico crank welded and balanced with TZ bearing etc $275.00 shipped obo Stock throttle with polished top and billet thumb extension $50 obo shipped 39mm pwk ALKY carbs with billet bowls $350.00 shipped Brand New 39mm billet intake cross over design $130.00 shipped Rear brake with master and block off no lever $60.00 shipped obo Billet rear brake res $40.00 shipped obo MINT cases $180.00 shipped 1-4 trans N down 45min time on it like new $375 shipped obo stock tank with dual pingle $80.00 shipped obo F.A.S.T billet flame stator cover mint $200 shipped obo long drag air filters $25.00 shipped Complete topend coolhead with 21cc domes, Full drag ported stock cy's built for 4 mill , upp intakes for 39mm carbs,pistons VERY fast setup $700 shipped obo I know im forgetting stuff but look at the pics fiberglass and frame are sold for sure . Rest i haven't listed may be bought but if you have cash and seriously interested just PM me. 1-254-715-0491 Mark for questions or [email protected] http://s232.photobucket.com/albums/ee248/x973788/

Bump looking for $ 1600 for the frame with front suspension,stem and chrome drag bars,billet short shifter,and chrome brake pedal. Extermely light frame powders like new. Will part if i can get the chassis sold. Will put the new wheelie bar AZCUSTOMS just built with it for an extra 300

pm sent

Bump Frame with billet short shifter,chrome brake pedal,stem,and chrome drag bars, and front suspension $1600.00 firm powder coats like new emerald green lots of metallic or flake in it as well. Tyson +6 out front. If it sells i'll part if any1 shows interest ont he parts let me know if theres something you'd be interested in.

Not yet but thinking i may part it out if needed would their be any interest??? Have to have the chassis sold locally before i'd part .

I bought another drag quad so now selling mine. I can sell it setup for sand or just like it sits for asphalt. Either way it will come with spindle mnts on the front. Best run was a 6.6 at 101mph int he 1/8th mile without a wheelie bar. I just had Tim at AZCUSTOM build me a 4 link chome-moly bar that will come with the quad BRAND new. I can assure any1 that buys it that if you weigh 205lbs or less and can ride on the bar it will run atleast 6.4's on motor maybe faster. That run was with a 1.55 60ft with one tire on the ground and have the pics to prove it. Any questions call me anytime at 1-254-715-0491 Mark or [email protected] Quads built right and have best of everything. Dependable and ready to ride. Jeff at FAST will back me up on all engine work that has been done to it as well. NOT TRADES Looking for $6,800 obo LOCATION is Waco,TX area $$$ OFFERS welcome just be reasonable Has the following:::::: Tyson +6 full chrome-moly hillshooter chassis extremely light bike should weigh around 260lbs wet +12 slcquadcustoms chrome swinger JJ&A drag axle Direct drive spindle mounts chrome drag bars 4 link wheelie bar Shearer OOF chrome pipes straight cut gears billet clutch basket lockup lockup cover billet FAST stator cover TM chain guides custom cut seat K&N FILTERS Marvin Shaws chrome brake pedal billet PRO DESIGN shifter Barn Guys front and rear fiberglass Billet brake res. Dual PINGLE DYNA TEK IGNITON WEISCO 4 MILL LONG ROD WELDED CRANK Full DRAG port by JEFF COOLHEAD Nology wires 2-5 override cryno'ed AND MORE I'M SURE I'M FORGETTING QUADS LIGHT AND FAST PICS IN LINK http://s232.photobucket.com/albums/ee248/x973788/ IF BOUGHT FOR ASKING PRICE I HAVE $900 worth of new Nitrous stuff that will go with the quad. Everything is new and complete including battery,etc etc i mean everything even a custom aluminum $160 bracket to mount the bottle.

You dont have to but its alot easier on the pump etc and then you dont have to purge it and you can use your inrichment to purge you engine when your done as well.

If your running your quad on alky you need to make a seperate res. to hold race gas to spray in with the NOS. You do not have to but your fuel pump,nozzles,jets etc will last alot longer if not forever. Alky will slowly ruin those parts if you spray with it. Trust me i have talked with Mcoys performance and many others on here and atvdragers etc and 95% of people spray with gas when running their engines on methonal.

65.00 SHIPPED

DAMN ONLY IF YOU WERE IN TEXAS

Great guy to deal with and very fast payment thanks again Mark

Thanks SOLD

$75.00 SHIPPED

ttt

Looking for a ALUMINUM drag tank for my Banshee let me know what you have and its condition and price thanks Mark

TTT

Need this gone hows $85.00 shipped sound

OFFERS???

Selling it because i dont run front brakes. Everythign is in ex shape and working order and comes with calipers,disc,brake lever and res, steel braided lines line new to both calipers and brake res. Brake pads like new as well. Bascially everything. Looking for $120 shipped or make me and off or possibly trade for? Can get pics just ask