kubitza123

bump $110 shipped

Bump really just need the cages

V-FORCE 3 REEDS cant be used with NOS because theya re carbon fiber and with the cold NOS hits them they will shatter. Also no1 makes epoxy style reeds to fit vforce 3's. Since Chariot isnt making any cages for 3 months i'm going to have to find a set of v-force 2 cages and have TDR make the reeds. So any1 have any V-FORCE 2 CAGES FORSALE???

I DID AND NO MORE HE SAID FOR 3 MONTHS which suxs exactly what i need

I need the best reeds for drag racing on a 4mill full drap port on ALKY F.A.S.T MOTOR. Putting it on NOS so they have to be epoxy so vforce 3 reeds are out. Saw some SRP billet ones but they are out of stock for another month at Magic racing any1 know somewhere else to buy these at?? Chariotracing ones use epoxy right and are billet does he still sell them??? Any ideas links etc.

You can never have too much power lol . You just have to have some common sense on using it. You could kill yourself on a moped if you dont have any sense. Yes the turbo would be more for the strip.

Need some v-force 2 reed in ex shape for my Banshee let me know what you have and a price.

I'd go with a gixxer and slap a turbo on that bitch and let it rip. I hate Busa's they are ugly as hell and heavy.

Send them to Jeff at F.A.S.T and get a full port trust me it will be fast too.

Any1 have pics of where the mounted the nitrous parts on a banshee?? Like the fuel pump,soleniods, bottle,battery etc.

bump

I bought spindle mounts and no longer need these. The have brand new bearings and seals in them. They are for a drag quad beens they are made with no rotor bolt holes. They are basically MINT shape could use alil polishing to make look perfect again. Any questions call me at 1-254-715-0491 Mark or [email protected] These are nice light trick looking hubs. Might trade for??? billet parts, or ?? just let me know what you have and its condition Looking for $120.00 shipped PICS IN LINK I do have PAYPAL just add 3% fee charge and 100% feedback on ebay,here,atvdragracers,etc all under the same name http://s232.photobucket.com/albums/ee248/x973788/

I'm fixing to start running Nitrous on my ALKY drag banshee and the best way to do so is by using race gas on a wet system. So there for instead of having another quart bottle mounted for the race gas that mixes with the nitrous i want a stainless or aluminum tank that is split in the middle so i can just Have one fuel cell and the nitrous tank instead of 2 or 3. Link to any sites thatsell such a thing would be great or i'll just build one

Yeah your pulling around 70lbs more than me just in rider weight. Also if your quad frame and all the compoents on it are not light drag ones and frames not lightened will be another big difference. My quad probably weighs in wet around 280-290.

What gearing and type of port work. Mines a 4mill 392 on alky and havent made but 3 passes on the track with it and it ran 96mph in the 1/8 mile which on a good pass with better gearing should break 100mph. But its lightened etc.

PM sent

Thats probably not too far off depending on whats done to your quad. Whats you mods etc.

I would have love to seen that 1. After i found out if he was ok i would have been laughing my ass off. Sounds like me though anytime i have crashed and burned i'm back on my feet about as quick as i landed on my ass to make sure my rides not destroyed lol.

I had them on a yfz a i5500 kit great kit and shocks for the money.

Also have to keep in mind its a 525. If you big bored a YFZ or any other 450's to a 525 etc they would make way more power than 48 .

Well basically he should have smoked you. The bikes arent even comparable. If yours was fully drag ported by a good builder and lightened and on alky should have been a decent race. But your no where near comparing apples to apples there.

Whats your 4mill run in the 1/8?? And what was his 10mill running in the 1/8?

probably want a 20x8x10 So you have enough gear but you dont need a tire quite that wide if your racing the quad in you sig been your not running a full drag port etc. Just imo

thats for the axle and everything on it i'm sure it doesnt say anywhere that it includes the swinger

THANKS and glad you love the shocks