kubitza123

Thanks guys. I was happy with it just takes alot of time to do one and do it clean and neat. Still going to add a pressure saftey switch soon .

Thanks Guys running it this weekend if all goes well tuning it tomorrow. With a 20- 30 shot on it should be around 150hp at the rear wheels 120-130 on motor alone its on alky. Hoping to see 5.8's or better on motor alone in the 1/8th and around 5.5's-5.7's with the gas on if i can do my part. I weigh 200lbs so not a light jockey either and 6'3.

Got it all finished and put together last night. Going to run it threw some heat cycles tonight then tune it tomorrow morning and if all goes well race sat. night. Nitrous systemed turned out good i thought built the wiring harness and heat shrink all connections,wire loomed etc. The front stainless tank that mounts in front of the pipes is the race gas enrichment fuel for the nitrous. Don't have a pick but theres also a stainless battery box we built that mounts on the top bolt of the strut between the filters. Has the micro switch built into the billet throttle and added a billet push button so i can control and use the nitrous whenever i choose. Might help give any1 wanting to install a kit some mounting ideas etc Overall i think it came out well and nice and neat.

LMAO yeah and Obama's a great president too

A guy on Planet Sand had real ones he made for a banshee fronts were $600-700 and so were the rears. Looked sweet but to rich for my blood. But yes real ones have been made before.

Should be at the track this weekend. All my wrong piston screw ups did give me time to complete the install on my Nitrous. So when i get to the track if i can get it in tune good i will be able to spray it as well if i want. I'm pretty sure i'll want lol.

Thanks Rico. Yeah they should be here tuseday or wed. It was all my own fualt. Thats what happens when you get in a hurry the first time and order what you think they are before tearing it down lol. Tired to get it back together quick and ended up costing myself two weekends instead of one. The second set that was wrong i used a caliper ont hem which isn't really the best thing to use but the ones that came out were 72.45 so i figured surely i would need 72.5's beens i'm sur ethey ar eundersized alil. Well i order those and they came in and measured 72.00. Which doesnt make much damn sense beens the 73.5's i got the first time measure exactly 73.5. None the less i should have taking my time and went to my cousins machine shop and got the tool to measure the bore and got the right shit the first time, but i decided to the dumbass way and spend more money shipping shit back .

In this economy i think you going to end up keeping wether youw ant to or not for a top dollar price like that unless some1 is wanting to build one and keep it as a collector or soemthing. When you can buy a complete built 10mill drag bike or bigger for that or less with a compelte chrome-moly chassis, air brushed glass etc ready to run its going to make it hell to sell a chassis for the same wether its top of the line or not. I wish you luck maybe yours is better than ours i hope.

Damn some1 with a yfz should jump on this what a steal

SOLD!!!!!!!

Only reason its forsale is i run the 1/8th and need 5 gears. This trans worked great and is like new. No core charge etc for only $260.00 shipped Any questions can be reached on here or 1-254-715-0491 Mark Open to trades if its something i need let me know what you have and condition etc.

Need 2 stock 250r reed cages for my cheetah let me know what you ahve and a price

[i have a basically brand new 1-4 neutral down for a mere $260 forsale,

Bump any trades???????? mgiht would boot alil etc if it was something i needed

Precision Powersports builds them. I mysel flike it better than any other. They look sweet and hav ebuilt in mounts for your wheelie bars and a vey fair price. Thanks for the compliment i hope to have it to the track in another 2 weeks and see some 5's. Already melted it down first trip . Turns out i need a fuel pump big thirsty engine suked the billet bowls and the whole fuel system dry by 4th gear and went lean resulting in a melt down. Hard way to learn but it will be back together soon.

Laughin my ass off;)

I would order some turbonator's off ebay first thing oh STAGE 3'S LMAO Sorry couldn't resist

Some damn good prices esp. on the shocks.

LMAO either that tank or fat girl lol

See what you guys think

Dyna sold

I have a like new Dyna Fs the newer style with 4 curve settings for Banshee for $125 shipped obo Have a complete kickstart shaft for banshee with spring gear etc $40.00 shipped obo 1- new in package 13t front sprocket 1- used ex shape 14t front sprocket 1- new 17t front sprocket 1-used 15t sprocket ex shape Like to sell all shipped for $50.00 or will seperate if needed

I have a like new LTZ400 swingarm skid plate not a cheap one was around $110 new and is like new still not bent up etc can send pics just send my your e-mail address looking for $50 shipped obo Also have a like new aluminum 6 pack rack for a YFZ450 looking for $45 shipped obo Stock YFZ450 axle with carrier i'm not sure if the bearings are any good or not doesn't have any of the axle nuts etc $45.00 shipped obo Can't seem to get my pics to load on here

What ya got PM me