PACIFIC NW BANSHEE

SO HERE WE GO ALL PRICES ARE FIRM AND DO NOT INCLUDE SHIPPING ATNN /// IF THE PICURE IS GONE THE PART IS SOLD stator cover $185 tail light cover $18 tail light lincense bracket $12 flag holder $15 reed spacers $15 grill $40 Banshee bra $15 yellow tank cover $10 stock welded crank $145 t5s no silencers triple plated $250 trans $185 Bra pad $10 bearing carrier $65 amp link $35 cool head $125 polsihed clutch cover side case $25 billet clutch basket with gear $130

The first head with out spark plugs has been milled to except a 4 mil crank and O ringed needs new orings and could use some polishing $65 shipped .The second head has bee milled 19cc has some pitting and could use some polishing $45 shipped .Front calipers painted silver loaded brake with brake pad $30 shipped .Rear caliper used and could use a cleaning $40 shipped . All shipping is thru usps in the us IF PICTURE IS GONE PART IS GONE

Read the small print on there web site says free shipping excluded on large items http://www.mxsouth.com/free-shipping.htm

Some one needs a hug

MMMMMMM NICE BIKE

Also have a complete set of powder coated black A arms with new rubber boots $185 + shipping

back up top

Yeah That R1 one bike was way over ten G when he had a price on it .As for his pricing as with any thing you over price it because some one out there will talk you down and bash you on the price it just the nature of the beast . I have found out over the years it is cheaper to let someone invest there hard earned money and time to build bikes/cars/trucks and any thing cool and swoop in and buy it cheap.But your definition of cheap and mine are different from his but there are plenty of slack jaw people out there who cant find there own ass from a hole in the ground let alone weld, bend tubing, use a tape measure or figure out how to make the electrical work or make it run .My point is can it be done cheaper yes but now go out find the roller the cheapest one I can find is around $800 now go find the motor oh and dont forget the harness and any other electrical pieces or parts you would need to make it run plus the ability to weld and a dash of mechinical apptitude and few hours here and there over a period of time and walla you have your self a cool toy that you can enjoy . But if you dont have the time or ability to build a bike of this level this can and could be one hell of steal now would I pay this much no because I am a cheap ass S.O.B . I still say this would be fun super reliabel bike that would last a good number of years just my drunkin opinion

Heres a bike to compare to this guy was asking good money last time I saw it posted . http://portland.craigslist.org/clc/rvs/2200885534.html

Man I like it looks good could use some powdercoating .The price seems fair for the labor and energy put into it not to mention just the fun reliable factor how reliable is a two stroke pushing 100hp ? That four stroke will run for years after the two stroke quits .

Yeah no thanks price is 55$ plus shipping

I am going to say no they will not fit lonestar or durablue only stock

All parts have some scuffs and scrapes .Rear stock axle pcd black $65 , Nut covers need new o rings $25 , Tie rods have been pcd assembled every piece is stuck/glued together $5 , Brake pedal pcd $25 , front wheel hubs need bearing and seals $25 , Foot pegs $35 , Rear hubs $35 , Bearing carrier needs seals and bearings $25 , Rear brake hub $20 . ALL PRICES DO NOT INCLUDE SHIPPING

Back on top

Back up top

first case is stock no chain whack comes with shift forks and drum $175 +shipping .Second case is bored out for a 421 has no chain whack $175 + shipping .The head is bored out for 4 mil and o-ringed $85 + shipping ,stock welded crank $120 + shipping , stock clutch basket $ 65 +shipping , Stock trans $185

Back up on top

Two six over round style/honda carrier swingarms .The one with the black slider is very well constructed and has plenty of scuffs and scrapes and is used but the chrome is not peeling $350 + shipping .The second one standing up is not as heavy duty as the first one but is very clean no real scuffs or scrapes and chrome is good $350 + shipping. Cascade small bore cpi silencers that could use some polishing has the mid pipes that have some small amount of outerwear burned on to them $185 +shipping

To the top

Here is the CL listing http://eugene.craigslist.org/mcy/2134949931.html

No just moving some parts I got laying around.

Shipping prices vary

1987-1994 stock CDI $45 , 1995-1996 CDI $45 , 1987- 1994 Dynatek $145 , light switch $20, 1987-1994 good shape has been cut wiring harness $25 ,1995-1996 good shape $25, key switch $20, 12 volt regulator $5 , coil has 2 different rubber plug boots $15 , 200w high output stator $80 .

Thanks guys all great buyers .

PM sent