b-nasty

Somebody needs a good motor. $2000.00

421 alky motor. 68mm ported cub cylinders with blaster pistons, Hotrods 4mm long rod crank with tz and max load bearings, 1-5 override trans, Adjustable timming plate with stock stator, lockout clutch with cover, V-force 3 reeds and billet intake for 35-39mm carbs, RDZ coolhead with 20cc alky domes. Cylinder and cases were ported by Dirt Works in Grand Island, Ne, they also setup the motor. Everyting is new except cases. Has chrome cover on stator side and chrome lock out cover with clear lens. Only needs clutch to be ready to go. asking 2100.00

Give me some offers on these parts want to move everything. Motor needs to go first.

Im not ignoring anyone but like I said before I want to sell the motor and frame first before it goes piece by piece. Sorry and thanks

Here are some more pictures of the banshee. Let me know if you need another photos.

motor- $2200.00 421 ported cub cylinders with blaster pistons, Hotrods crank with tz and max load bearings, 1-5 override trans, Adjustable timming plate with stock stator, lockout clutch, V-force 3 reeds and billet intake for 35-39mm carbs, RDZ coolhead with 20cc alky domes. Cylinder and cases were ported by Dirt Works in Grand Island, Ne, they also setup the motor. Everyting is new except cases. Has chrome cover on stator side and chrome lock out cover with clear lens. Stock frame with chromemoly subframe,not cut up but a few un-needed brackets removed. fresh powder coat. 350.00 -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. cant remember the brand, metal works (metal tech) I think? 350.00 39mm Mikuni pwk setup for alky with cable . 350.00 K&N Pod filters with pre-filters. New. 75.00 Shear Big Bore out of frames, one to each side.New 350.00 Stock fuel tank with dual pingle and chrome cap. 80.00 JJ&A 40mm Drag axle, complete minus carrier. 450.00 JJ&A 40mm axle carrier with bearings. 100.00 +10 tyson swingarm with chain. New 350.00 13 paddle extremes on rims, 22x11x8, not tripple buff. like new. 350.00 front marvin shaws. 12.5 eye to eye. 250.00 rear marvin shaw. 13.0 eye to eye. 150.00 front spindle mounts with tires. New and bad a**. 450.00 polished rear brake caliper with braided line. 100.00 polished rear brake piston and resevoir with chrome cap. 75.00 chrome brake lever.40.00 chrome shift lever.40.00 chrome steering stem. like new. 80.00 chrome motor mounts.40.00 polished footpegs. 50.00 billet thumb throttle assembly. 35.00 billet levers. 25.00 Drag cut seat with crushed velvet. New. 100.00 factory radiator with hoses. offer. factory un-cut harness with everything. offer

Sorry to everyone who shot me emails. We had a storm come through and the power was out for 2 days. But im back up and running now. I sent pictures to everyone and responded to pm's. If i missed you sorry and shot me another email. thanks

The motor is staying together as are the other items listed for sale. If somebody can help me with getting some pictures up I'll post what I have. thanks

I cant get the pictures to upload so if you would like some picture of everything shoot me your email. thanks

motor- $2200.00 Stock frame with chromemoly subframe,not cut up but a few un-needed brackets removed. fresh powder coat. 350.00 -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. cant remember the brand, metal works (metal tech) I think? 350.00 39mm Mikuni pwk setup for alky with cable . 350.00 K&N Pod filters with pre-filters. New. 75.00 Shear Big Bore out of frames, one to each side.New 350.00 Stock fuel tank with dual pingle and chrome cap. 80.00 JJ&A 40mm Drag axle, complete minus carrier. 450.00 JJ&A 40mm axle carrier with bearings. 100.00 +10 tyson swingarm with chain. New 350.00 13 paddle extremes on rims, 22x11x8, not tripple buff. like new. 350.00 front marvin shaws. 12.5 eye to eye. 250.00 rear marvin shaw. 13.0 eye to eye. 150.00 front spindle mounts with tires. New and bad a**. 450.00 polished rear brake caliper with braided line. 100.00 polished rear brake piston and resevoir with chrome cap. 75.00 chrome brake lever.40.00 chrome shift lever.40.00 chrome steering stem. like new. 80.00 chrome motor mounts.40.00 polished footpegs. 50.00 billet thumb throttle assembly. 35.00 billet levers. 25.00 Drag cut seat with crushed velvet. New. 100.00 factory radiator with hoses. offer. factory un-cut harness with everything. offer

This sucks but I have to part out my project before its finished due to some unforseen circumstances. Everything is still pretty much new unless otherwise noted. I will have prices here soon and pictures. I will combine items to make shipping as cheap as possible. I wil not part out the motor. I would like to see the motor and frame go first. Parts and bike are for sale localy in Omaha,Ne. 421 ported cub cylinders with blaster pistons, Hotrods crank with tz and max load bearings, 1-5 override trans, Adjustable timming plate with stock stator, lockout clutch, V-force 3 reeds and billet intake for 35-39mm carbs. Cylinder and cases were ported by Dirt Works in Grand Island, Ne. Everyting is new except cases. Has chrome cover on stator side and chrome lock out cover with clear lens. Stock frame with chromemoly subframe. -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. cant remember the brand, metal works I think? 39mm Mikuni pwk setup for alky. K&N Pod filters with pre-filters. New Stock fuel tank with dual pingle. JJ&A 40mm Drag axle, complete minus carrier. JJ&A 40mm axle carrier with bearings. +10 tyson swingarm with chain. 13 paddle extremes on rims. front marvin shaws. rear marvin shaw. front spindle mounts with tires. polished rear brake caliper with braided line. polished rear brake piston and resevoir with chrome cap. chrome brake lever. chrome shift lever. chrome steering stem. chrome motor mounts. polished footpegs. billet thumb throttle. billet levers. Drag cut seat with crushed velvet. factory radiator with hoses. factory un-cut harness with everything. Pm me for pictures and I will get prices on here later tonight. thanks

sent pm

Im done playing these he said she said kids game. If this kid wants his plastics back thats fine with me. But like i explained to him, i will not pay to ship something back becuase of another's ignorance.

People dont let this kid get the facts turned around, the money was to cover the shipping on the parts he was suppose to receive. Use your imagination to come up with how much it costs to ship plastics. I was trying to give a fellow HQ'er a good deal to help him out but in the end this kid just flat out lied.

Listen here guys this faggot sent me some fucked up torn up plastics that he said where in perfect shape, first he didnt even send the fronts then he told me they were in the mail. finally got them 2 weeks later. Plastics had broken tabs and cuts in them. Told him he could have his shit back but he wanted me to pay to ship it back. How does that work. He says there good and there junk but im suppose to pay for it in the end. Yeah right

What sprocket sizes should i run for sand drag racing, the bike is a 421 on alky. Thanks for the help.

Getting my 4mill all together but im having trouble getting the big o-ring to go into place on my RDZ head. Any incite into the easiest way to get her into place. thanks

Getting my motor put back together, 4mil crank with 68 cub cylinders. When i bought the cylinders i got a cool head and the domes the guy was running with it. The domes are 19cc and he was running gas through it. Does it matter what dome you use on gas or alky. What do you guys think i should be running for a dome. thanks

Im looking for a chrome +10 +12 swingarm for a banshee and a rear marvin. thanks

Went ahead and sent them out along with my cases to get them done. Hopefully the money is worth it.

Where and how do you hook up a pump. thanks

gravity, would 38mm be ok?

What size alky lectrons should i run on my 4 mill 421 banshee. thanks

Omaha, Ne

20-10-10, 10 paddle haulers with douglas blue labels. 200.00 buyer pays shipping. Email [email protected] for pictures.