b-nasty

Parting out the complete bike, If there is something you see that isnt listed pm me and I will get you a descritioin and price. If you would like better pictures of a certain part let me know and I can get them for you. Buyer to pay paypal fees and shipping. I have no problem paying a little for shipping if its more because of my packing. I would rather pay $10 because I used to much than not enough and somebody get something messed up. pictures at: http://s775.photobucket.com/albums/yy37/zx636-rider/ Complete bottom end everything included in order to bolt on your upper component and go. Everything is new, motor was only heat cylced never raced matter of fact it never left my garage. $950.00 cases ported 4mm hotrods longrod crank tz bearing's 1-5 overrided trans lockout clutch lockout cover Pancake bearing new clutch's and springs billet water cover billet stator cover OEM stator Im shure theres a few more items im missing. Stock frame drag lightened with chromemoly subframe, fresh powder coat. 350.00 -2 +1 a-arms with polished tierods, will come with billet dust caps and spindles. Fireball Racing. 350.00 39mm Mikuni pwk setup for alky with cable . sold K&N Pod filters with pre-filters. New. 75.00 Shear Big Bore out of frames, one to each side.New 350.00 Stock fuel tank with dual pingle and chrome cap. 80.00 JJ&A 40mm Drag axle, complete minus carrier. 400.00 JJ&A 40mm axle carrier with bearings. 100.00 +10 tyson swingarm "Like New" with chain. New 350.00 13 paddle extremes on itp rims, 22x11x8, like new. 350.00 front marvin shaws. 12.5 eye to eye. 250.00 rear marvin shaw. 13.0 eye to eye. 125.00 front spindle mounts with tires. New and bad a**. 400.00 polished rear brake caliper with braided line. 100.00 polished rear brake piston and resevoir with chrome cap. 75.00 chrome brake lever.40.00 chrome shift lever.40.00 chrome steering stem. like new. 80.00 chrome motor mounts.40.00 polished footpegs. 50.00 chrome thumb throttle assembly. 35.00 chrome levers. 25.00 Drag cut seat with crushed velvet. New. 100.00 factory radiator with hoses. offer. factory harness drag cut. offer

Im located in Papillion,Ne 68046. Buyer pays for shipping, I have no problem helping with shipping. I would rather pay 10 bucks out of my pocket because I used to much padding then somebody get something messed up.

No straight cuts. Come on guys this is a heck of a deal. To have a override done and buy the lockup and cover alone almost comes out to the asking price of the whole bottom end.

bump

Bottom end still for sale.

Fouledout421 and Rotax Raptor P.M have been sent. Bottom end is still for sale. Do the math on he parts its a hell of a deal guys. thanks

No. Bottom end staying together. thanks

Complete bottom end everything included in order to bolt on your upper component and go. Everything is new, motor was only heat cylced never raced matter of fact it never left my garage. $950.00 http://s775.photobucket.com/albums/yy37/zx636-rider/engine/ cases ported 4mm hotrods longrod crank tz bearing's 1-5 overrided trans lockout clutch lockout cover Pancake bearing new clutch's and springs billet water cover billet stator cover OEM stator Im shure theres a few more items im missing.

carbs are pending with the sale of the top end.

Bottom end still for sale. Somebody make me a reasonable offer.

payment pending for topend. bottom end still for sale. Im not parting the bottom end out at this time. thanks

call/text 402-660-1378

Will Sell the motor outright for 2000.00 obo. I also have the carbs setup for the engine and the oof's. I will make some a hell of a deal on the engine and carbs so the motor will be ready to run. Or if I have somebody willing to buy the cubs and the bottom end seperatly I will do that. Cylinder's will come with head, domes, pistons. Bottom end will be complete minus the above parts. http://s775.photobuc...6-rider/engine/ 68mm Cub cylinder drag ported RDZ thunderbolt head with alky domes blaster pistons cylinders ported cases ported hotrods longrod crank tz bearing's 1-5 override trans lockout clutch lockout cover v-force 3 reeds billet intake billet water impeller and cover billet stator cover chrome cover and misc parts

Im willing to take a few parts off the engine to make it cheaper for someone. Willing to work out a deal to get somebody a hell of a motor.

Heres a few pics of the motor. Let me know if your interested and im shure we can work something out. http://s775.photobuc...6-rider/engine/

Sorry at 2k its a hell of a deal. Other members can vouch for that.

Price lowered to 2000.00 Buyer gets complete motor. Check my other posting for pictures and details.

The pictures dont do the powdercoat justice. Its shocker yellow and looks really good. I just finished building this bike so it has never been raced. It has only been started and heat cycled. Dirtworks out of Grand Island, Ne did all the motor work and porting. He ballparked it to have a little over 100hp when all dialed in. there are Lots of extras and im sure im forgeting alot in my lists. All name brand parts. 68mm Cub cylinder drag ported RDZ thunderbolt head with alky domes blaster pistons cases ported and matched to cylinder hotrods longrod crank tz bearing's 1-5 overrider trans lockout clutch v-force 3 reeds billet intake billet water impeller and cover chrome cover and misc parts lots more Stock frame drag lightened chromemoly subframe fresh powder coat Drag cut seat chrome drag bars chrome steering stem chrome motor mounts Fireball racing -2 +1 chromoly a-arms with polished tierods 39mm Mikuni pwk setup for alky Powerjets Dual pingle shear big bore out of frame pipes K&N Pod filters with pre-filters Shear Big Bore out of frames JJ&A 40mm Drag axle JJ&A drag Carrier +10 tyson swingarm Marvin shaw competition shock all around 13 paddle extremes front and rear marvin shaws shcoks front spindle mount aluminum rims with tripple buff tires Lots of chrome and custom parts call/text. 1-402-660-1378 Looking for a rzr, rhino, or 4x4 quad. will put up some cash for the right deal. http://s775.photobucket.com/albums/yy37/zx636-rider/engine/

2100.00 throw in the carbs for 200 if the buyer wants.

bump

make me an offer. Also have other parts like carbs and pipes to make it complete.

Most of its billet aluminum, but what ever you see in the pictures. Bike is not getting parted until the engine sells. But yes the front will be for sale then.

Motor was built by DirtWorks. Havent had a chance to race it. It has been started and tunned. I have a set of 39mm mikuni carbs that are setup for the motor that can be included for extra. As soon as the motor goes that rest will be parted unless somebody wants to make me a cash offer for the whole bike. 2200 for the motor and I will help with shipping charges. P.M me with questions or if you need any other pictures. I also have a video of the motor running. 68mm Cub cylinder drag ported RDZ thunderbolt head with alky domes blaster pistons cases ported and matched to cylinder hotrods longrod crank with tz bearing's 1-5 overrider trans lockout clutch and cover pancake bearing v-force 3 reeds billet intake billet water impeller and cover chrome cover and misc parts lots more http://s775.photobucket.com/albums/yy37/zx636-rider/engine/

Come somebody needs a new motor. Cheaper than building it yourself. Everything new. Make me an offer.

Come on. Somebody needs a heck of a motor. P.M me and we can work out a deal. Ready to sell.