olyeller

are the ready to run or need work done to them? pistons? If it do go let me know

would you be willing to take 85.00 shipped to 67217? paypal only.

I have a pair of stocker they are empty (has no jets in it). has TORS removed but no idle screws drilled or tapped. has slides and needles. Is that what your looking for? 75.00 shipped w/ tracking info sound okay ?

interested in the frame, what are you asking and your location?

what would shipping run for 67217?

I have a pair of matching cases that has been repaired it does still have a gouge in the bottom of one side of the chamber. clears the crank and has beem smoothed down alot. with shift forks . like to get 150.00 O.B.O. push shipping prefere to do paypal let me know can send pix via text or email.

I have two sets of cylinders one set will need to be taken to 65.50, 65.25 was in them and has low compression. other set will need to go up to 64.50 , 64.25 is too small piston. 165.00 shipped with tracking numbers. will send pictures upon request.

would you take 120.00 shipped?

would you be willing to do 100.00 shipped on the ITP sand stars and the timing plate?

would you take 150 shipped on the 2 into 1 intake w/ carb?

where you located at?

I have a stock trans, and stock head, stock stator cover with the factory chain break area cut out for after market casr saver. Will ship via USPS with tracking number. 200.00 O.B.O. will accept paypal.

getting rid of some stuff. 1 pair of cylinders will need boreed or honed stock port work cylinders are between 65.25 and 65.5mm. 175.00 o.b.o plus shipping and paypal fees if not sent via gift. Stock trans. minus clutch assembly 150.00 o.b.o plus shipping and paypal fees if not sent via gift. matching top and bottom case. broke rod had bottom case tigged back together. has gouge in bottom clears crank no chain wacks 75.00 o.b.o. plus shipping and paypal fees if not sent vai gift. factory crank has bent rod crank straight bearing decent / good 50.00 o.b.o. plus shipping and paypal fees if not sent vai gift. Upper and lower A-arms for right side and lower for left side 75.00 o.b.o. plus shipping and paypal fees if not sent vai gift. Stock carbs with TORS removed and idle screws installed w/ good caps 75.00 o.b.o plus shipping and paypal fees if not sent vai gift. If my prices are off please let me know. Based them off of local prices of parts on craigslist and what not. Will ship via USPS provide tracking numbers. can send via e-mail or text. have sold on e-bay @ olyeller81 and on HQ to some people have not a complaint yet.

What sort of port work is that?can still see factory casting marks and ports are small.

do you need just the two dog bones or the whole setup? I know I have the dog bones 50.00 shipped obo if I do have the mounts and hardware add 15.00. sound good let me know.

its on its way bro.

[email protected] will send tracking number when it is shipped. Sorry bout the delay on getting back to you. Been swamped

I have the key&switch assembly, housing it sits in, and the metal bracket that mounts to the bar clamps. Also have the stock thumb throttle piece that your thumb presses against. It is pressed on to a shaft that goes into the housing may also have the bushings for it. let me know what ya got

got a clean and good stock flywheel from 04. 35.00 shipped sound good to you?

I have some sets of cylinders. 65.25mm , 64.50mm, 64.25mm could use a hone or boreon all sets. stock port and stroke. 200.00 O.B.O. plus shipping approx. 20.00 and 3% for paypall fees. Can ship out in two days after payment recived.

I would give you 75.00 for the whole set up.

I have got 3 or 4 laying around. any way to test them on a bench? whats going price for used ones stock?

What is wrong with gecko's

I have got a pair of cylinders that one of the skirts broke on and a case that is junked(spun beearings) shoot me an offer and go from there

would you take 50.00 shipped to 67217 with paypal for the pink spring and pink shocks?