Jump to content

#1JUANstunna

Moderator
 View Profile  See their activity

  • Posts

    6,155

  • Joined

  • Last visited

  • Days Won

    44

 Content Type 

Everything posted by #1JUANstunna

  1. #1JUANstunna
    Set the plastic on it and take a pic.
  2. #1JUANstunna
    Post a pic of this death ride.
  3. #1JUANstunna
    I was thinking the same thing Green, my guess is closer to 85-90hp.
  4. #1JUANstunna
    You must not be full of awesomeness like LOCOHOMO.
  5. #1JUANstunna
    ^ cuz his awesomeness is what makes his bike run so well!^
  6. #1JUANstunna
    Maybe it's time to lose some weight James!
  7. #1JUANstunna
    GO to an auto parts store and pick up a Mighty Vac. You will thank me later.
  8. #1JUANstunna
    This thread is 15 months old, PM Turbo and he'll make what ever you want them to fit. He's checks in frequently.
  9. #1JUANstunna
    I'd say that your floats are out of whack and the running problem was do to that and the pipes being full.
  10. #1JUANstunna
    That reminds me! Mine had the wrong needle and seat for gravity flow carbs. You might pull out the seat and see if they are 1.8mm (pump) or 3.5mm (gravity). It's right on the underside after you pull them out.
  11. #1JUANstunna
    That's a possibility, you might pull off your pipes and make sure they aren't full of alky too.
  12. #1JUANstunna
    Brandon recommended to me for a starting place: 6DP4 needles, Dumps .118, Mains .116, and clippard at .089.
  13. #1JUANstunna
    Take them apart and clean them real good and check the float height.
  14. #1JUANstunna
    17-19mm is the float heights from the gasket mating surface.
  15. #1JUANstunna
    Adjust your floats! What carbs?
  16. #1JUANstunna
    Talk to BigBucks on here, H.O.D. Chassis, I saw pics of one he did on his facebook page. I'm sure he will point you in the correct direction. https://www.facebook.com/HodCustomChassisAndFabrication?fref=ts
  17. #1JUANstunna
    If the shoe fits, LOL!
  18. #1JUANstunna
    Sounds like someone else in this thread and we all know he's full of it.
  19. #1JUANstunna
    How many accounts does the OP have?
  20. #1JUANstunna
    He is really recovering from reconstruction surgery from his double j blaster widening kit breaking and damn near killing him.
  21. #1JUANstunna
    I believe those are a set that Finch did with his hammer and chisel when he first started porting.
  22. #1JUANstunna
    What are you asking? Are you needing smaller boots or what? That bolt spread is for 38mm mukuni boots and up.
  23. #1JUANstunna
    Where is the pic?
  24. #1JUANstunna
    So you're saying even busted ass Shearers run better than Snipers?
  25. #1JUANstunna

BHQ Quick Links

×
×
  • Create New...