250psd

I have a boost bottle. $15 shipped. Paypal [email protected]

I have a pair of stock headlights that I bought for my old Banshee that got stolen. I recently bought a new one with headlights. They come with the eyeball covers in green. Paypal preferred. Pics available if needed sunday ( 07/27 ) Good shape!

I actually think it's a 34mm not a 33mm. Anyone else with some input?

A-arms sold! Make a decent offer on the rear shock. It's basically brand new!

Thanks for the replys but bogging on take off would be a pilot problem or reeds IMO. At the top would be a main jet problem. Your plugs should tell you if you are lean or rich on you main. Bog could be from either. I guess i'm answering my own question in a sense but i'm not used to the Keihin carbs and need a starting point with my setup. I want to kind of nail it the first couple of rides and have the jets I need instead of riding and ordering jets after a failed attempt.

Basically brand new rear shock very low hours; $150 shipped. Stock A arms chromed. Never been used after chroming w/ new ball joint boots; $200 shipped. Paypal preferred. Send Pm for more info. I don't have pics at the moment but will get them if there is interest. Prices are pretty much firm! Thanks Dominic

My mods include Stage IV 2 into 1 carb 33mm Keihin PWK, Timing at +4, Dyno Port 2 into 1 exhaust, Twin Air filter with airbox at about 1500ft above sea level. I just started getting good at my Mikuni's and now switched to a Keihin. I don't have this set up on the quad yet but when I install I want to have a couple of jets handy to get me started. What is a good starting point for my set up? Pilot and mains sizes? The carb currently has a 48 pilot and 160 main. Any help is appreciated. Thanks Dominic

Looking for the airbox adapter for a 2 into 1 setup. I was going to run a pod filter but I trail ride and there are to many puddles and mud. Thanks Dominic

I checked their site and found nothing. Is there a place to buy replacements or should I just contact them directly? Thanks Dominic

Like the title states. I bought a two into one set up and i'm missing these parts. Have Paypal. Thanks in advance, Dominic.

The public school system is doing a hell of job these days! I never wanted or needed a Blaster but I do now!

Even with a billet impeller I was running about 220* on a 90* day on the trails. They will run hot if you don't get enough air through the radiator regardless of your pump impellar. When it warms up on me I try run it at a steady pace to cool it down. If you don't have that option, shut her down for a couple minutes. 220* is pushin' it IMO. I would not try to exceed that temp.

Found some. Thanks guys!

In need two stock headlight assemblies. Let me know what you got. Thanks Dominic

Interested in an a arm frame. Shoot me a PM with a price.

You shouldn't have to remove the grip or lever to put it on. It should be two halves screwed together.

Do a search for Automotive touch up. They sell car paint in aeresol cans. They also have an adhesion promoter for plastic parts. You can get most colors under the sun also. It's a bit pricey at $20 a can but worth it. You can get away with one can of the adhesion promoter, 2 of the base, and 2 of the clear for the plastics. I think the adhesion promoter is only 10 buck a can. They ship fast too.

You are right on that. +1, +2 or whatever will give you a wider stance in the front and longer wheelbase. That is a plus for each side: +1 will give you +2 overall ect. I run mostly trails and such so stockers suit me fine. I think mostly track riders will benefit from the wider stance in the front, IMO. Some guys do it for better A-arm quality. Aftermarket shocks will help you more than an aftermarket A-arm when doin' the riding you do. When buying stock A-arms make sure the ball joints are good, they are not replaceable.

Do you have the stock headlights?

I do agree with above posts but if you do trail riding most stock parts will do you fine IMO. If you ride the sand you'll want more of the aftermarket stuff. The stock parts on a Banshee are a dime a dozen on this site and Ebay. A good way to see what you need or are lookin' for is check out sites that sell OEM parts. They usally have microfiche diagrams of every part. Good luck! By the way, if you have any questions do searches, most likely the question has been asked here before. I spend most of my time on here searching old posts.

Got front bumper today. Looks Good! Thanks Dominic

Vito's has a kit to rebuild it for 6 bucks. Also check out the repairs and mods section. I have a post under "kick starter" to help you install it. I still haven't done mine so I can't tell you my personal experience with it. Good luck!

Bump! Bought front bumper!

Hey thanks a lot. I was lookin' at this and seem to be a pain to keep the spring and ball bearing in place while puttin back together. Any tricks?

I got a rebuild kit for my kick starter lever and I am lost on how to install. The guts were all together missing when I pulled it apart. Does any one have detailed instuctions to put the kit in (spring and ball bearing)? Any help is appreciated! Thanks Dominic