Jump to content

nuc_welder

Members
 View Profile  See their activity

  • Posts

    68

  • Joined

  • Last visited

 Content Type 

Everything posted by nuc_welder

  1. nuc_welder
    Can you send me some pics at nuc_welder @yahoo.com?
  2. nuc_welder
    Sent you a pm
  3. nuc_welder
    Ok I think I'm going to both at the same time, my next question is would an aftermarket intake be noticable enough to be worth it?
  4. nuc_welder
    Well I seen some cylinders on ebay that I'm thinking about buying. They have extra boost ports cut in them, but they are for stock stroke. I want to keep up with my friend he's got a stroker with stock cylinders. http://cgi.ebay.com/ebaymotors/Parts-Acces...A1%7C240%3A1318
  5. nuc_welder
    Well bought a set of used works shocks, and the bushing didnt come with them. Anyone know where I can get a new set at, tried to use stock bushings, but didnt work out.
  6. nuc_welder
    Ok so I'm wanting to know should I get a 4 mill stroker crank, or just get an agressive port job? Mainly drag on paved road, with a little gravel road raceing.
  7. nuc_welder
    Where you located at? I'v got an 05 660 raptor, pretty much stock, just lowered, piped, & jetted.
  8. nuc_welder
    Sent you a pm
  9. nuc_welder
    Oh yah my elv. is about 500ft.
  10. nuc_welder
    Well I do some dirt road drivin, but mainly drag on the highway. One of my riding buddy has a 4mill stoker with stock bore, another one is buildin one with atleast some 404 big bore cyclinder, and not sure what else. I just want to be able to beat them!
  11. nuc_welder
    PMed U
  12. nuc_welder
    Ok I'm wanting to build a 421 cub motor this winter, prolly gonna use vito's sleeper cyclinders, stoker kit, and 8+ pistons. I found a chariot performanse cool head on ebay fairly cheap, just wanderin if that head will work with my setup? I know i'll need some domes to go with it, I'm using 118 race gas, just curious what size dome I need to start out with?
  13. nuc_welder
    Sent you a pm on the plastics
  14. nuc_welder
    Do you still have the plastics? :biggrin:
  15. nuc_welder
    I was affraid that I was bidding against a hq member. Where is this shane from, and does he fix them or sell parts?
  16. nuc_welder
    Just bought a set of works dual rate with resy's, and the guy said that one is leaking a little oil. Does anyone know where to get these rebuilt in southeast missouri, or where I can get the parts to do it my self?
  17. nuc_welder
    O.K. just took my bike to get a barnett clutch put in and asked my mech. to tune my carbs also, when I got it back it was doggy at top pretty bad, so I figured that I was rich, so I dropped a size on the mains. When I put the carbs back on I noticed that my right carb is missing the air screw? How bad will this make it run, and where can I get a new one at?
  18. nuc_welder
    Well my arrow lines up with the one on the case, I have bout a half an inch of play in my hadle. I've already bought a barnett racing clutch to put in it, I guess the way it sounds this weekend. Oh yah some one told me to use 3 hd springs and 3 stock spring is this right or do I need to use all 6 hd springs?
  19. nuc_welder
    Ok it feels like the clutch is slippin at high revs, just wanderin if changing my oil will help or do I need to just suck it up and put a new clutch in it? I don't ride very much so it's been a while since an oil change. Thinkin bout doing all upgrades myself so what all do I need to look at if I change my clutch out? Thanks for any help
  20. nuc_welder
    Well my clutch is slippin bad so thinkin about changing it out myself, just wanting to know what all I'll need, and what all to do, besides get a manual?
  21. nuc_welder
    Well I also just added my carbs, and dont have my jets right from that mod. I've got 300 mains in it, and it dogs out at 7/8 to full throttle, and I've lost alot of top end speed?? 300 is the smallest main I have right now and was just wanting to find a good starting point to get, so I dont have to buy a bunch of jets that I dont need.
  22. nuc_welder
    Well I just got my CPI in frames (thanks frogger) in today and going to put them on this weekend when I get some time, just needing some help on where to start my jets at?
  23. nuc_welder
    Sorry I guess that I forgot to say what mains I'm running right now, I started at 300, then dropped to 290, but it seemed to get worse for some reason, so I went to 310's, and it seemed to be a litter better, but still not right, I can't even beat my raptor that I used to spank bad.
  24. nuc_welder
    Does anybody know where i need to start with my jets, would 200 be a good starting point? Any help would be great.
  25. nuc_welder
    Come on someone has to know something that will help me out? ::

BHQ Quick Links

×
×
  • Create New...