shovelhead

got a pic of swingarm? is it still aval.?

I will just drain it out & start fresh. Yes I do need the 110 Thanks

Ok I am getting ready to fill my tank for first time with 110 Gas . Do I need to drain out old 89 gas first or just gas & go?

OK tell me this.. Let's say we have 2 fairly identical quads Quad 1 is 100 hp with stock frame & 175 lb rider Drag race only in sand... Quad 2 is 100 hp with stock frame & 250 lb rider on sand & dirt drag race only ** what swingarm lenghth would you seasoned guys & builders reccommend for these 2 racers and why ?

Thanks Jeff I got your pm & i sent you one back. I appreciate the info & price! Thanks everyone for your info & help!

This is what I am trying to find out... What does a No link swinger do differently tha n a standard Link sytle does? what advantage is one over the other in drag racing only trim? Yes , Havoc does have a nice looking swinger !!

Sand & dirt Apprx 80-85 hp. with one lard @ss on back... I was told to start with 12-14 over, but I wasn't sure about running a link arm or no link with either struts or marvin drag rear shock?

Can some of you guys tell me differences in swingarms? Like Link style vs no link?? What do I need to be looking for for a drag set-up? No link? or what? I do know I am looking for 12-14+ lenghth .. any info greatly appreciated before I buy something I don't need

Thank you ! I can always count on fellow BHQ guys..

Well I do have 2 that could use to be replaced, but my thinking was while it is apart why not do them all if it isn't that hard. I see what your saying ..so maybe I should just do the 2 bad ones & clean up the others..??

Can someone tell me how difficult it would be to replace the case studs with all new studs? Is it possible to do yourself? if s how do I go about it & what to use when putting new ones back in ( re: Locktite, etc etc..)

I would be interested in swingarm & rear marvin?

Thanks for info. guys! all taken care of.

Can some of you drag racers give me some names or websites that offer Rigid drag frames with like adj. rear lenghths ..etc. & tell me what to look for & what to stay away from.. Thank you!

Anybody bought a set of Billet manifolds for some 35's That you don't want or not going to use? I really would like to find a new set & I don't mind paying a fair price .Thought I would check here first before ordering a set.. Trinity's or Vito's or internal crossover i pc?/ What you got.

$110 shipped in cont. US ??? that is less than 1/2 of what I paid..anyone?

Here is Invisions webpage on the Skeleton Warrior" Graphics. http://www.invisionpowersports.com/catalog...3b455bbe5176e24

I don't know if anyone would have an interest , but I bought a full set of these Invision Powersports Graphics for Banshee in the "Skeleton Warrior " In the Blues colors.. I paid them $229 + shipping & waited 4 weeks to get them. I have never used them, and have decided to go with Fullbore plastics. They are still in plastic & each section is marked where they go. These are thick, full color graphics. Wicked looking.. If any one has any interest I will sell them for $125 shipped In Cont. US Lower 48 states only. I can take Pay Pal. My lost your gain.. I will be back in min with pics..I need to downsize them first.. damn it it will not let me upload my pics..If you have any interest shoot me a reply with e-mail address. I can do that way I guess. sorry

Thats it? & just put on block off plate? Damn thats too easy! & Yes the tors is coming off too! Thanks

Ok I got a block-off plate , so can someone tell me what I need to do to remove the parking brake system? I have no instructions..Thanks

Here is ones Alba has in 4 colors of CF.. http://store.albaaction.com/shop/TANK-SHROUDS.html

Ok, I will check the everything once I get them off & before new carbs go on..It could be the gas ? I think I will start off by draining everything & starting fresh. by the way I like your Shee! Nice colors..

Yes you will need a tors removal kit & will need to drill & tap each carb & change out carb tops like $45-50 I got mine from M&M atv ..others have them as well. here is what you need:

I love that seat cover..how long did it take to get from Cascade?

I have got my big @ss hammer ready too! :biggrin: