lt250rfd

that sucks! sorry to hear that, hate to see anyone get burned.

always a great meal at richards, and cold drinks. i'd rather be up their, stuck down in indianapolis working. my family has a place in pembine so up that way a bit in the winter months, fun times. i don't usually ride the quads up their, i mostly fish in the warmer months.

the dungood trail system is good, by dunbar and goodman wisconsin. i never rode the quads on them but did the sleds, i know their open to quads in the winter. nice trails and fine establishments to stop at.

like bass said check the plug wires and swapping them. mine was missing this week and kept dropping a cylinder thought it was the electrical. everything checked out good, then noticed the small link tube on the carbs came off on one side. reattached and been fine since.

don't need one anymore, i picked one up.

Looking for an E-Brake block off plate. Found a few on ebay, wasn't sure if anyone on here makes them.

Could there be a spark issue? ?????????????????????????????????????? shouldn't be spark if it will run, i'd put it back to stock settings and work from there with exception of your mains. you should be able to get it dailed in good, 3 turns seems like a bit much on the air mix screws.

pick up a clymers manual or search the threads for a download, good basic stuff will help you with settings.

hurley is a great time at least on the sleds :biggrin: never rode the quads up there

Should be air mixture screws, even with the tors removed.

do you know what mixture your friend ran the shee at?

still don't seem like a bad buy, everything looks good.

Bump for a good buy. Went and looked at the bike a few weeks back but the case was cracked. A good roller and a lot of good parts.

yeah, no luck i tried. some one else might be able to get it posted up. i just thought it was a cheap price if some one was looking.

I see there is a banshee on craigslist Rockford, Illinois area for $850 cash. I'm not sure how to add link to it.

don't need picked up a set of pro circuits

Where did you pick it up from? Just curious is that the one that was posted on craigslist?

Send me some pics of the pipes please. here or [email protected]

got one too, didn't open it.

any vids with it in reverse?

Yeah, i posted up here the other day did the same thing. I was suprised when i went to the dealer this morning and they had some on hand. I've usually had to order everything everytime i'm in their.

yes, i actually got a used 06 pressure plate with the nut, washer, and rod off of ebay. i only rode a few minutes up and down my street and it seems to be alright so far. before i replaced it i kept jacking with the old one i could only get to the end of my street and it back it self off and lose the clutch. did that three to many times, plus the loss of oil and coolant. if it dries out enough this week i'm hoping to take it for a spin.

you are talking about the center clutch adjustment nut on the pressure plate?

WTB some aftermarket pipes, open to most if price is right. let me know what you and if you have some pics. how much to 60436? thanks

thanks for the info. the yamaha dealer actually had them in stock so picked some up this morning.