sandbum80

^^ agree 100% it's always the negatives that your heat never the positives

Failed to mention the rim, wonder what else is bent 8)

Also have to take in consideration regardless your cases have to come apart to have case work done (bored, epoxy) as stated you will want the crank checked over, depending on carbs you may have to switch, need dm pipes, after adding everything up m67 is correct a better option would be to sell off your motor and start fresh. Is your motor currently drag ported? What pipes, what carbs

I don't have the old pistons, the crank it a 10mill billet twister, 120 rod. I got it from a guy locally. Ill give them a call

Sorry roger, it's a trex, the "twister" was just meaning the brand. -Adam

Engine im buying, 10mill t-rex twister Where can i buy pistons for this engine/gasket set? How far up can the sleeves in the cylinder be bored to, its currently at 75.5mm. What "shelf pipes" are going to be my best option until i can save up enoughf to have a custom set made speciffically for the motors porting/timing What kind of compression do these motors like for alchohol, usually race 3-400ft sand, michigan elevation. Will be running 39pwks Anything i should now about this engine to "help" me, tricks n tips. Thanks in advance

Yea was great thanks everyone

Cases sold Cylinders sold pending payment Crank sold pending payment

Buyer backed out everything still for sell really need stuff gone feel free to make offer

I'm not actually running them but they will put into cylinders thats why I said "usable"

Just need use set of pistons must be runable but don't have to be perfect 64.25 bore

I will get a ton more tonight

IEverything's sold as a package except pipes damn that was fast!!! Thanks hq

Got a big motor so these parts have to go. Stock trans with drum 75shipped Stock cases no wack clean 100shipped Dean Sundahl(10x Baja winner, also owned 1st banshee ever) drag port fresh home, 64.25 bore some cylinder wear no pistons. 300shipped In frame CPis + silencers, been welded a few times chrome chipping on inside can't tell when on bike) 275 shipped Stock carbs no tips 45 shipped Clutch basket +plates hub. 40 shipped Clutch cover 40 shipped Stock stroke crank welded very nice 100shipped Kickstart 15 shipped Text for more close pics 7342606913

Thank you for the nice words, after reading more and more about dean I think I'm going to hang on to them.

Payday bump these are very very nice cylinder and if you don't remember dean Sudahl is a huge desert racer with tons of knowledge. These are some rare cylinders to own. Lowest I'll go is 375 shipped. If someone wants pistons I can supply new one for my cost on them.

No interest feel free to offer/trade

Sorry edit: they are at 64.25 bore***

$400 shipped

These are a set of cylinders that are drag ported by dean sandahl. There are some Wear marks that the hone would not take out. They are currently at 65.25 do plenty life left in them. I personally have not held a better quality port job in my hands. I had a local builder take a look at these and with alchohol est. 95-100hp. Does not come with pistons. Freshly sand blasted. $450 shipped. Any questions or more pics call/text 734-2606913 Trade considered and partial + cash for cub 4 mill/ 4 mill crank

Sorry this was a mistake, they will not work with standar arms

Great condition set of Marvin shaw shocks, the bottom ridge is turned down to run a single a arm front end with the stud on top. Feel free to call/text with questions (734)260-6913 250 shipped

Great condition set of Marvin shaw shocks, the bottom ridge is turned down to run a single a arm front end but will still work just with a standard arm. Feel free to call/text with questions (734)260-6913 250 shipped

I'll buy the stand haha

Sold