RagunCajun

You can get more than 4mil power on race fuel using pump gas. Build a bigger engine. 10mil or 10mil super will do it. Good luck putting that to the ground though.

Well. Guess Ima heat cycle mine a few times and do a leak down.

Will do. Thanks. I have to order some orings tomorrow for the exhaust flange. I ripped two orings trying to put the pipes on. I got one in and the last oring i have is stretching a little over night. I want spares. Starting to look like a banshee somewhat: Thanks again for the people who noticed i originally got the wrong shocks. I'm going to have to get some exhaust wrap for the stingers. They will for sure melt the air filters. I really wish Shearers fit better. It may take some massaging so they expassion part does hit the frame at the bottom.

I didnt understand power curves on dyno charts. I never ridden any higher hp bikes than mine. I just researched which builder, called then discussed what i wanted and went from there while making it clear i didnt care about a fancy peak hp or tq number on a piece of paper. The info you are looking for is already out there. Just search Serval and youll see TONS of pages. The top person has a big wait time....

What exhaust springs are people using for big bore in frame shearers? The newer is OEM and im not sure which kind my old ones but it seems the top one needs to be longer. http://s240.photobucket.com/user/raguncajun/media/DSC02091_zpsmqoefl4w.jpg.html I also need to order some orings for the flange. I ripped two so far. I have my last one stretching over night so it fits.

I had one built around that same level of gaming capability a few months ago for around $1400-1500 minus monitor, mouse and keyboard

I recently ordered from them. The lady I delt with there was amazing over the phone. Good product knowledge and a pleasure to talk to.

just a quick post, we have company on the way. This came in today: cascade cover, brake/tail light, fuel tubing, correct(19" ish) shocks, brake light bracket. Although it looks like ima have to get something fabbed for it to work and bolt on. No big deal. http://i240.photobucket.com/albums/ff111/raguncajun/DSC02086_zpsciflbslx.jpg

Look at my pictures in my build thread from when I got my stuff back from the powder coater. There's a couple other things not pictured though I think. If you do the handle bars and/or steering stem. Tape off where the stem clamp is on top and tape off the handle bar grip area. Same goes for where stuff goes on the axle if you do the axle. I'd keep it chrome if it's chrome.

Went with a psi banjo bolt instead off eBay. Thanks for looking and the offers.

And the price.

Speaking of them, my custom seat cover just shipped. Cascade ftw.

I got fed up trying to get in touch with cottonbrand. Ordered this this morning http://www.ebay.com/itm/141871239835?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Hopefully it's worth a damn. Loco and zilla havent steered me wrong yet

Just bought one. Thanks

I didnt even know there was another. You and others ranted and raved how bad ass and amazing Cotton branch was and i figured that is the best and it's worth the wait. So how's DRW's case savers. Looks like ill have to give up on cotton branch.

like cotton branch. cant get a damn case saver because he doesnt answer pm's on fb

I have this. $10 US over whatever it cost to ship USPS priority with tracking via paypal. http://i240.photobucket.com/albums/ff111/raguncajun/DSC02076_zpsckpnwt2w.jpg http://i240.photobucket.com/albums/ff111/raguncajun/DSC02077_zpsu379phlj.jpg I refuse to use it due to a logo.

im just here to read about LED stuff.... I got one of them cheap ebay brake/tail lights on the way. Hopefully it isnt junk. http://www.ebay.com/itm/271576634073?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I need to see pictures. I want to make sure it's not beat to crap.

The best advice i can give so far is get a custom wiring harness from Kompulsive Concepts.

I had a custom harness built by kompulsive concepts. So it should all be plug and play. I deleted the key long time ago. That is worthless

pics and price. going to 70394. ill add 3% on my end.

Converting my 2001 banshee to have a tail/brake light. I have the wiring and light on the way. I'm just missing the stuff dealing with the switch. If the brake pedal lever is different, I need that too.

at least machine shops else where have work. Down here, people are closing doors...it's sad.

I guess I have the only big serval with no polished stuff.