350shee

bump, pm sent Viper

all brand new, pm me for pics... $300 + shipping for cover and lockout $500 + shipping for swingarm

I would bet on a bad crank seal.

still for sale

stock banshee head, shaved .045 $35 shipped terry cable throttle cable SS braided for lectrons (40mm) will also fit stock carbs. $30 shipped Banshee Direct Drive lockout $65 shipped Banshhe Direct Drive Clutch Cover (new die cast cover) $225 shipped. banshee +6 swingarm custom 4-link style $350 all these parts are brand new except for the stock head.

bump

bump, $290 shipped

pic sent let me know if you got them.

Direct Drive

BUMPY!!! $350 + shipping

bump 2... NEW raw clutch cover to go with it $225 $290 Total plus shipping ALL BRAND NEW

bump

bump

this pic is a +8 but i have a +6 exactly the same $400 shipped. file too big sorry, i can email if anyone is interested.

it is not junk you just need to replace the cushons.

pm sent

Brand new $65 shipped. pm if interested.

just thought this should be up at the top!!!

yes Direct Drive is the only company making a one piece die cast clutch cover. there are billet covers that tip the scales at around 9-10 lbs these are 3lbs and also the billet are 550 these are 249 ready to go. as for the height of the cover, you will notice it at your foot for the first ride but after that you will never notice it again.

Direct Drive quick change clutch cover are absolutly the best. orderd on monday it shipped on tuesday. http://www.directdrivecnc.net/banqcm.html

I'm sorry i did not see the KIT part of your post. It is hard to think any company can package a kit like that together for that cheap. however, i still stand behind the 7mm/65!!!

im not sure where you buy a $1500 crank at but that is more than double over retail! unless its a billet crank wich is only around $1200. this guy asked for an opinion and i gave one to him dont bust my ballz because i gave my opinion. he never mentioned that he already had a hot rods crank (stock stroke) he obviously has a few bucks to spend because not everyone has the cash around to build a 4mil cub like he was asking he would still have to buy the 4 mil crank. so this is my opinion 7mil crank forged 7mil cub cylinders 65 bore and trench the cases for the stroke. your opinion 4mil crank forged 4mil cub cyinders 68 bore i still see him buying new pistons, still has to buy a crank 7 should be the same price as a 4, has to buy the cylinder stock 4 and 7 are all the same price, and trenching is only 150 so i see him spening a whole whopping 150 buck more and and would have in my opinion a better motor. once again all IMHO

a drag motor will hit over 100HP on gas and 115 with alky. for a play bike id go with a 7mm 65 bore you will have plenty of pep and its a 404cc on gas with just a clean up port on it, it will easily be 80hp and thats plenty to dune with fat or not!