steverb

Thats why I rebuilt the top end. Bored and new wisco pistons.

i know this has been asked a million time but i haven't herd of someone solving the problem. i have a 2004 banshee and its miss firing out of the left cylinder. her is a video of someone else bike acting the same here is what I have done so far. did a compression check it was around 100psi so i had the topend rebuilt, put new read in v force 4s pulled the carbs cleaned them. look for anything abnormal didn't see any thing, also pulled the carb of my friends running banshee and tried that. tried swapping the plugs wires over, new plugs again and after that no change. this is what has been done to the banshee. toomy t6 pipes, 280 jets, cut air box, im at sea level bike ran fine with this until i parked it for a couple of months. my last trip was at Winchester bay and had no problems until i took it out the next time.

anyone? i know my spelling sucks and some of the wording, it was 630am and hadn't had my coffee yet.LoL

ok it a 2004 banshee with toommy t6 pipes and 290 jets. the bike stared miss firing on the left side,so i cleaned the filters still the same,tried new plugs no difference,swapped the wires over still still miss firing on the left.so i pulled the carbs and the reeds both clean no cracks in the reeds nice and tight, carbs very clean floats good left slider had a little more wear then the right but slid up and down no probs.so i did a compression test and cold it was 110 warm was just over 100 so it looks like a rebuild. but would the low compression cause the miss fire?

just got back from Winchester bay. had a blast hills were big.except i lost my mod quad kick starter. had to pull the one from my buddy's bike and put it in my camel back so we could just pull it out and use it when needed. we also checked out the drags at coos that was pretty cool. unfortunately we left a little early dew to the rain. funny had to come back to Canada for hot sunny whether. now that's a first. :beer:

good thing there to week to lift it over my fence. plus they wouldn't want to see my gun collection up close.

Surrey B.C. Canada :beer: and i didn't steel it.

NO!

i'm also trying to quit. been 5 days now only had a little puff here and there. not going to bad. been smoking for 15 years time to stop.2 other buddy's of mine are also quiting so it help by keeping the pressure on each other. :beer:

sounds like its not getting enuf air or the jeting is off.

"has any one seen the new 08 banshees. orange and black looks bad Ass. every one in the states thinks the banshees are dead but they are still alive..." yup ive seen them they had one a the local yamaha here.they do look good.

i think its funny how you here one newfi talk and you think thats how we all sound.lol

lower mainland b.c. 2004 banshee owned since new :beer:

BAD RIDERS! theres just no need for that.

4 air :thumbsup:

try flipping it to reserve. ive seen it happen to many times when you think theres enuf fuel but theres not.

welcome all of ya! :beer: lets see some pics? :woot:

thats funny go to tell ya that the grips must be good

odi lock grips you can get them at your local mountain bike/ bmx store. best grips I've tried.

that doesn't get to hot and melt from the pipe?

ive had my t6s for two years and so have two of my buddies so far no problems here.

love my fenders! i have two banshee's here and both have there fenders.

you think 8000 is expensive wait until the tax and and other fees are added then its over $10000.found that out when i bought my 2004.

i use the garmin 60 csx with the handlebar mount from garmin and it holds nice and steady.

take the lid off your air filter and run it see if its getting enuff air.