White06Shee

Welcome

Huh My Father Owns Quite A Bit Of land Out Here In Mesa Az, And I Would Say Easy 2 Acres Im 6th Topped Out, Thats Weird That 5 Acres You Cant Get Passed 3rd In That Much Land, If I Launched In 2nd Ill Hit Third A Couple Of Seconds Later

i pulled the tab thing out and i ran 1/2" spacers and it works fine now. now my other question is what do the stuffers do??

I Had The 2into1 And The O-ring Thing Is Where The Rubber Intake Boot Thing Conect To The Billet Manifold The O-ring Is In The Middle Of Those Two. And Everyone Has There Own Personal Preferance ABout The 2into1 Compared To The Dual's. I Trail Rode And I HAd The 2into1 And Loved It But The Trails I Ride Are 5th To 6th Gear All The Time So I Swithed To Dual 34 Pj's And Had Them Line Bored To 35.5mm ANd Love It So I DOnt Thing That Answered Your ?? Thow

I Use To Have One That I Bought From Jeff(elison) And I Just Sold It But Here Is Another 2into1 That I Know OF That Is Trying To Be Sold I ODnt KNow If He Sold It Or Not BUt Here It Is. Also I Sold Mine FOr $300 Shipped In Awsome Condition http://www.bansheehq.com/forums/index.php?showtopic=73486

Check Your Compression And I Think If Its Over 155 Or 165 You Need Race Gas, I Have To Run Race Gas But Im At 187psi :thumbsup:

hey Directdrive does polishing go to there website and go to polishing and they give prices that might be a better idea but looks great

4 forth pic is the inside of the vforce where its hitting

here are the pics that im talking about 1 First pic is how it fits in the stock cage 2 second pic is how it doesnt fit in the vforce 3 third pic is that tab im talking about

i just bought the pro design intake manifold for vforce reeds, well theres a tab that sticks out behind the mani and it fit perfect in my stock reeds and will not go inside of the vforce reeds do i have it the wrong way or something, i can take some pics and post it up so you understand what im saying

Im Getting Ready To Go OUt Of Town So Im Going to drop my quad off at Kenz Cycle Tech, Since I Live Down The Street, Now IS This A Good Price $1700.00 ANd Thats Me Dropping The Shee Off ANd It Includes.. Dune Port, Lighten Flywheel, Timming Plate(billet), Piston Kit, Welding And Trueng Crank, And Tune. And All Gaskets And Bearing, Everything I Need Pretty Much, And It Will Be Done The Day I Get Back(Next Friday) So is $1700 A Good Price Or What I Already Have Cool Head 19cc DOmes, Vforce 3's, cpi Inframes, 34pj's linebored to 35.50mm, K&N Also, and They Said I Should Be At A Lil over 60hp i ride wide open trails like 5th gear to 6th gear all the time

I Was Just Going To say That ::

Sweet Looking Shee , I Know Here In Az, You Can Regester A 4 Wheeler Very Easy AS Long AS It Has A Headlight, Taillight, Horn(It Can Be The Horn You Have To Sqeeze), And Turn Signals Or Knowing The Hand Signals, 2 Of My Friends Have Raptors Street Legal, The Only Thing The Dmv Told Me Was Because Its 2 Stroke Ill HAve BIG Problems Because Of Pollution/Emissions. Now If I Regestor It Out Of Town Where There Is Now Emisions I Can Get Away With That But Registoring Its A Differant Story

I Just Sold Mine For $300 Shipped ANd That Was Hard To Sell ANd IT Was Trinity 2 into1 With 35mm Carbs, Cable, Uni Filter, And Bolts. BUt Good Luck

Dam, Where i Live The Coldest It Gets Is 40 Degress And Thats At Night Haha ANd During The Day Its Like 70 But The Summer Time Is Differant Story

Cool I Was Just Wondering And THANKS

My Question Is: Do I Have To Have The Acorn Nuts For The Noss Head Or Could I Use The Stock Head Nuts?? It Might Be A Stupid Question But Whocares I Just Wanna Know. Thanks FOr The Reply's And Looking

If You Have A Set That Will Fit Cpi's For Cheap. Please Pm Me A Price Shipped To 85208 Mesa, Az Thanks FOr Looking

I HAve GOne Threw Two Sets Of Stock Pipe Hangers, I Have cpi inframe Small Bore Pipes Is There Any Billet hangers ICan Buy For Cheap That WOnt Break???? If So Who And Where Do I Buy I Thanks FOr Looking

I Have A Trade That Might Happen Tommorrow, But Ill Sen dPics Anyways Just Incase It Falls Threw But Pm You Email Adress

Um Pm Me With A Price ANd We can Go From There

Can I Use Pro DesignDomes FOr My Noss Head?? Thanks FOr The Replys

I Would Like to Sell my 06 Head Not Milled, No Groves In Perfect Condition Make Reasonable Offers Can Get Pics upon Request Thanks For Looking

I Got A Guy In Canada Thats Wants It, But I HAvent Got Any Money Yet, So Yeah.

I Wanna See Some PIcs Man, Sounds Like You Have Alot Of Fun