f4istunna

i have 2 sets of stock carbs if your looking for stock by chance

i have one from a 01 looks to be straight i rolled the bike and doesnt push the caliper at all. Never rode the bike to tell for sure though. Hub and rotor $20

i have headlights and a blue pro design kill switch

i already sold a few things off of it and have a few parts pending but if you want i can make a list of whats left and maybe we can work a deal. Im in NE ohio where are you at?

yfz a arms have sale pending he supposed to paypal tom. when i get pics if it falls through ill let you know Shoot me an offer on the cool head not really sure what to ask. Ive watched a few on ebay and got an idea but... wheels....

ya i have a few sets of oem yamaha rears $60 sound good for a pair? ls ill send my # thanks im still working on a list of parts and pics on this. I planned on it today, got started then we ended up having freakish warm 60* weather in ohio lol so i just had to go out and ride. Ill get pics up as soon as i can though.

I have 2 spare 05's one has new hotrods crank, good cylinder, head has a few broken valves (topend is off) other needs crank, good topend (disassembled and split) I can put the good topend w/ the hotrods bottom end for a complete motor you would just need topend gaskets and bolt the top on. Shoot me an offer if your interested and let me know which combination of parts thanks

i have a few sets of oem yamaha fronts and a set of itp $55 for the oems $65 itp (few dings in lips)

i have headlights and dg pipes and silencers $100 for all

i have a few sets of oem yamaha f&r wheels and honda fronts oem, itp, douglas. Im assuming you have honda hubs?

I have a 2001 for parts. has coolhead, dg pipes and silencers, wiseco pistons (not sure bore,( prev. owner told me .20 over), and dome size) tearing down today so should have more info I have to complete motors, one needs crank bearings the other im pretty sure does also but ive yet to tear down. Has blue and black gripper seat, blue race cut plastics, Some of the parts have been spraypainted by previous owner ( i can strip the paint if needed) Everything seems to be straight and good useable shape other than the right side a arms have dents (still look straight and wheels is aligned but dents in right arms) Ill get some pics of the parts today when i tear it down. Let me know if you guys are interested in anything. Im also parting out my parts yfz. Mostly complete minus what i used from it, no front shocks, rear caliper, or grab bar. Most of the rest i have is stock all in good shape. Bottom end has new hotrods crank w/ low hours. Ill get pics and a complete list up asap thanks

Looking for a set of 9" rear hiper beadlocks, ring color doesnt matter as long as wheels are good and useable yamaha pattern. Also looking for 20" razr, razr2, or irazr and front razr 2 or irazr 21 or 22 thanks

Everythings sold

Willing to trade for some parts also rear 9" yamaha hipers fasst flexx bars steering stabalizer raptor +1 or +2 stem and big bar clamp aftermarket or rebuilt raptor or yfz shocks razr, razr 2 or i razr tires maybe intrerestred in yfz motor for thewhole banshee, or yfz crank for partial trade thanks

Full set yellow/red plastics- decent shape uncut normal wear gas tank- good shape w/ petcock crank- good bearings and rods radiator- good shape few fins pushed over no leaks comes w/ hoses Moose gasket set- New in box stock silencers- baffles out good shape stock mid pipes w/ sheids-good stock header pipes- some surface rust, good shape stock bore cylinders-good shape no gouges or out of ordinary wear stock carbs -good shape Stock bore pistons - Namura New in box stock head- good shape boost bottle -good throttle cables - new never used throttle cables-used w/ peices that go in top of carb (tors??) footpegs- ok shape still decently sharp headlights-one mint one has small break in lens at edge complete wire harness-good cdi coil headlight/run switch clutch lever w/ perch, ebrake and cables rear master cylinder rear brake lever rear caliper w/ good pads and lines rear rotor , hub thumb throttle assembly overflow bottle stock width axle -some surface rust looks straight swing arm skid stock swingarm good bearings rear carrier w/ good bearings chain and sprockets, sprocket hub- some life left front and rear wheel hubs grab bar- chrome little beat up stock a arms, tie rods, spindles etc - normal wear in paint look to be good and straight frame- paint worn off in spots, straight stock front shocks stock adjustable rear shock front calipers w/ pads and lines front bumper - beat up a little stock steering stem- good straight front wheel hubs and rotors 7/8th aftermarket handlebars- brand unkown black service manual stock heel guards kick start lever, brake and shift levers complete bottom end w/ sidecovers, good tranny needs crank replaced Probably forgetting some stuff. Have complete bike and some extras only thing missing is seat. Not sure on prices for all of it off hand so accepting reasonable offers for now. Please dont lowball though

i have a 97 needs reassembled all parts there for now, just listed for sale or partout but would much rather sell whole. Im in ohio 2 hrs from detroit

i have a 700 raptor, and yfz. Have a banshee project and have had a few banshees in the past. I prefer the 700 for xc pretty much just a personal pref. I have yfz front shocks on it, stabalizer, (hope to get fless bars soon) im only 5'5 and 140lbs so sometimes the raptor handles me lol but i am way faster through the woods on the raptor than any other bike. If i were you id take both out to the woods one day and switch back and forth a few times and see whats more comfortable to you and what your faster on. Comfort is a big factor in xc race due to how long your riding non stop and rough terrain

pm sent back thanks

more of frame

Im gonna try and make a list of all the parts and some sort of price list if i can today also

new throttle cables and old

misc. If you guys wanna see pics of something in particular let me know. can only load one at time on the site due to the size

frame

cylinder

cylinder inside