Jump to content

letsgetthisdone

Members
 View Profile  See their activity

  • Posts

    705

  • Joined

  • Last visited

 Content Type 

Everything posted by letsgetthisdone

  1. letsgetthisdone
    I can't figure out where to put the rezzies. Every time I find a spot it seems like the line is rubbing on something or they'll get smashed if I wreck or get hit . Pics would be great. thanx
  2. letsgetthisdone
    I say ditch the boost bottle and start at 350/32.5 just like thes other guys are sayin. My neighbor is runnin almost that same setup but we live in Vegas with about 2,200ft eleveation so it wouldn't hurt to start out rich cuz plugs are way cheaper than pistons.
  3. letsgetthisdone
    I wouldn't run anything lower than 91 octane, even in a bone stocker with pipes.
  4. letsgetthisdone
    how much caster do you guys usually run and how do you measure it.
  5. letsgetthisdone
    TCS TCS TCS TCS TCS TCS TCS TCS TCS
  6. letsgetthisdone
    look closle at the ring grooves and there will be one dowel pin in each that are staggered within two inches of each other.
  7. letsgetthisdone
    OK, but where do i hook up the killswitch. The instructions are so damn vaque.
  8. letsgetthisdone
    I'm install a killswicth on my shee and was wanting to know what to hook it up to to be able to remove the key and on/off switch. And what do you guys do with the tors connectgers when you go to bigger carbs. thanx.
  9. letsgetthisdone
    Hey watsup guys. I live in las vegas and want to know what kind of tires I should get. I'm tired of replacing bald razrs every two months. The terrain is hardpack with a lot of embedded rocks.
  10. letsgetthisdone
    thanx man. I'm gonna get pix up in the image forum once its all together. Later, Sean
  11. letsgetthisdone
    the arms are american star racing
  12. letsgetthisdone
    That is the URL.
  13. letsgetthisdone
    a bung is an internally threaded tube. i'll have pics in sec
  14. letsgetthisdone
    f*ck, wheres the pic
  15. letsgetthisdone
    I can't figure out which direction the upper a-arm goes in. With it installed this way the bung for the balljoint is about 1/2mm away from the spring. If I switch it with other one then the balljoint is 3in forward from the lower one.
  16. letsgetthisdone
    Send me some pix of the eyeball a-arms to [email protected] How much would u charge without the spindles shipped, and do they include tie-rods.

BHQ Quick Links

×
×
  • Create New...