Jump to content

banshee332

Members
  • Posts

    1,569
  • Joined

  • Last visited

Everything posted by banshee332

  1. Yes passion racing for sure. Thats who I would go with.
  2. prepare to hold on cause its going to run.
  3. passion racing is the way to go with or with out the 4mill crank. Give jim a call from passion racing and he will let you know what he can do. 918-232-3950
  4. Passion racing is the way to go. jims prices are good and his port work is awsome. He can also design domes for your motor set up.
  5. Thats what I run in my drag bikes and it seems to keep them cooler!
  6. call jim from passion racing and he can design the domes for your set up. 918-232-3950
  7. Yes 1/2 gallon is enough, Make sure you flush all of your old coolant out for the ice to work right.
  8. I would also put a pancake bearing in also, Thats so you dont weld the ball to your clutch rod.
  9. Blaster wheels will fit a shee but you need the blaster hubs also.
  10. Thats for sure jim from passion racing is one hell of a good guy, also a very good engine builder. His motors are not for pussies
  11. It dont look to bad. If it was a do it yourselfer its better then most
  12. No there is a lot of people that can get them for you. Try Jim from passion racing, he could also port your cylinders if you want them ported. His screen name on here is passionRe
  13. you can get a spacer plate or get your domes or stock head cut to take the bigger stroke.
  14. You can run a pvl I ran one on my 10mill
  15. Ok, make sure you bring your bikes to so you have it on tape of them getting beat.
  16. Yeah ok, we will see about that one of these days.
  17. I agree with B. His shee hauls ass. I also have a passion motor and will run you anyday of the week if you have enough money to make it interesting.
×
×
  • Create New...