FOXBANSHEE30

My cases are gonna be off anyway. I have to intall the new stator and a new clutch. So they wont be a problem. MEADOWS.

Is there any cartain way to do this?? Certain paint or anything?? Any tips will be greatly appreciated. Thanks for the help. MEADOWS.

I'm about to get a Noss Head w/ 20cc domes, a lightened flywheel (boonman), and an Adj, Stator Plate at +4 degrees. The rest of my mods are below. Will i have to jet up or down to make all these new parts all work as well as they should? I do have a SINGLE CARB with the Trinity 2 into 1. Thanks for the help. MEADOWS.

Stock grearing on a 'Shee is 14/41 with a 104 link chain. So if i went with a 13/42, how would that change my gearing and would i have to get a longer that stock chain?? Thanks for the help. MEADOWS.

I dont have an airbox. I have a K&N Clamp-on. So i have to take the little boot that hooks up to the carb itself off?? Thanks for the help. MEAODWS.

I live in Middle TN so im not sure of my elevation. Sorry. MEADOWS.

If i advance my timing with the Ricky Stator plate +4 degrees and get a Noss Head with 20cc domes can i still run 93 octane gas? Or will i have to go higher octane?? My mods are below.....Thanks for the help. MEADOWS.

Is there a certain way to get the 2 into 1 kit off?? I took all four of the bolts off that look like they hold it on but it wouldnt budge. Am i doin something wrong or missin somethin?? Thanks for the help. MEADOWS.

Will the rear brake rotor off of a 94 Blaster fit on a 97 Banshee?? Thanks for the help. MEADOWS.

anyone have one of these rotors. They are a lot cheaper than the others and i was wondering if the price matched the performance. Thanks for the help. MEADOWS.

thanks a lot my mind is now made up. Thanks for the help. MEADOWS.

I bent my stocker so now i need a new one and i was thinkin about gettin a G-Force Axle. How well do these compare to a Durablue or something? And another question.. Will i be able to use all my stuff off of my stock axle?? Like my brake hub, sprocket hub, stock carrier. Thanks for the help. MEADOWS.

anyone here ridin in TN and know of some tracks?? Im close to Nashville. Thanks. MEADOWS.

I'm gettin a new clutch and i was wondering if i could use the old clutch springs or if i had to have new ones?? Theres not much money difference so either way.Thanks. MEADOWS.

Anyone got one of these cluth kits. They are really cheap. Someone let me know. Thanks. MEAODWS.

Aight guys i let my brakes get a little too wore out in the back and the piston pinched the disc and now its out of round. Anybody have one?? Thanks. MEADOWS.

Whats the best way to get the seal out?? I know u heat the carrier to get the bearings out but the seals are bein a pain in my ass. Thanks. MEADOWS

I want that rear caliper mine is leakin all over the place. I really need it. Thanks. MEADOWS.

i got a blockoff and not he fluid just comes around it. Is it supposed to have a gasket that goes on it?? I put some sealant around it and im givin it time to set and cure. Thanks for teh help. MEADOWS.

so should seals and a block off be a good start to remedy my problem?? I know the piston isnt gummed up because i took it apart and it slides in and out relatively easy. I cant figure out what it is. Could there be air in it? I need some help. MEADOWS.

I'm not sure what the deal is but i was tryin to replace the rear brakes and i got them in but now when i hit the pedal and i have nothin. The piston in the caliper does nothin and fluid squirts out where the p-brake is. The cable is gone so it doesent work but the little assembley is still there. Will a parking brake block off pad remedy this and make the piston move out?? Thanks for the help. MEADOWS.

i know the prices of teh stuff, but i have heard that there is a discount to the HQ members, maybe i was mistaken. Plus im not sure how much shipping will be. Thanks for the help. MEADOWS.

I need to know how much an anodized blue Noss Head with 20cc domes and that nifty "BANSHEE" Cluth cover plate would be. Thanks for the help. MEADOWS.

u mean like u put a mark on the case to know where ur stock timing is?? And then u advance from there? Sorry for askin dumb questions. Thanks for the help. MEADOWS.

Well anyone have a flywheel puller?? Or know a place to get one? so they arent hard to install?? When i split the case will i lose my oil? And what do u mean about splitting the cases being the point to set the timing?? Thanks for the help. MEADOWS.