FOXBANSHEE30

Does this look like the Exhaust or JETTING page?? They're gonna move this. Check in the other Forum. MEADOWS.<<<CWB>>>

i just replaced mine all the way around. But i used ALL BALLS brand. (Liked the name...) Well ive had them in there a while and they are working fine of course. As long as they arent stock u should be ok. I didnt put a grease zerk in mine b/c the only thing that will great is the spacer up against the carrier, which the spacer fits so loosely in there it doesent really touch. MEADOWS. <<<CWB>>> [/color]

u shouldnt have to run race gas for a timing advance. Maybe go up one size on the main but that should be it. Advancing the timing doesent mess with ur compression. Just my $.02. MEADOWS. <<<CWB>>>

yeah i just got my plate and advanced. It has instruction, but i found them hard to understand. I got most of my info from BHQ here. But yea its a really good mod. Well worth the 35 bux. MEADOWS. <<<CWB>>>

am i supposed to jet up for the advansed timing?? Thanks for the help. MEADOWS. <<<CWB>>>

just got my new Ricky Stator Plate on and i advanced it +4 and now i have everything back together. Set the air gap and everything and i need to know if i have a problem will i be able to tell before something serious happens?? I dont want to have to put a fresh rebuild on it b/c the one on it is good. Thanks for the help. And for the record i changed my color for all u haters. MEADOWS. <<<CWB>>>

i run Yamalube 2-R Racing oil and i run 93 octane gas. The best way i have found is to fill up a 5-Gallon gas tank and then just add 16oz. of whatever oil you want to run and shake it up a lil and it wont smoke. Except for a lil at start up and while its warmin up. Always works great for me. I use to do the same with my Blaster before i upgraded it to a Banshee. MEADOWS. <<<CWB>>>

That seems a little rich on the mix.. Klotz is thick oil anyways. i use to run it but now i run YAMALUBE 2-R Racing oil and i love it, but i run 32:1 maybe a lil leaner. 40:1 sounds very heavy especially with Klotz. The pilots bein gummed up thats kinda weird though. I've never ran into this problem before nor have i ever heard of it until now. Hope u get it fixed. MEADOWS. <<<CWB>>>

well first off u shouldnt have to clean the carbs everytime u try to start it. The pilots are gummin up?? thats weird.... what pre-mix are u runnin?? U might be a little rich.... I never have to clean my tank or my carb, i just do on the occasion that i have it off. Sounds like its flooded with oil to me but i could be wrong... it wouldnt be the first time... just my opinion.... MEADOWS<<<CWB>>>

whats wrong with my blue writing??? its YAMAHA colors for cryin out loud. Thanks so much for the help SAND. MEADOWS.<<<CWB>>>

come on guys i need the help bad. MEADOWS. <<<CWB>>>

i just put on a new g-force axle and now i cant get the chain to tighten right. I'll have it where i want it but as soon as i roll it forwards it seems to hang. It's like it has some kinda kink in the chain or its not lined up right. W/O the chain on the axle rolls very free (slight drag from rear brakes). But i cant seem to figure it out. Thanks for the help. MEADOWS.<<<CWB>>>

how can u tell when a chain is wore out?? Thanks for the help. MEADOWS.<<<CWB>>>

I just put my G-Force axle in but my chain is hella tight now. Should i have to adjust it?? My stock was bent the last time i adjusted it though. Thanks for the help. MEADOWS.<<<CWB>>>

N/m i got it but thanks anyways. MEADOWS.<<<CWB>>>

How does this thing go on. The directions hurt more than they help. I cant figure out how to get either spacer on or the locknut, but the axle does look great and a lot longer than stock. Thanks for the help. MEADOWS. <<<CWB>>>

how much are they?? Thanks. MEADOWS. <<<CWB>>>

I just got my plate and the flywheel puller and now i cant get the puller to thread into the flywheel to pull it off, it has totally messed the threads up on the puller. Are the threads on the flywheel reversed?? (meaning loosen to tighten?) Thanks for the help. Oh and BTW does anyone have a flywheel puller they want to sell me?? MEADOWS. <<<CWB>>>

What kinda carb are u replacing the stockers with?? This will effect the jettin and might explain the wet plugs, but as far as the electrical goes if everything is new thats weird. MEADOWS. <<<CWB>>>

Hey whats the deal with the air gap on the flywheel?? Just got a ricky stator plate. How do i set the air gap?? Thanks. MEADOWS. <<<CWB>>>

Bullshit...! I have a Maier Radiator Cover and i made a grille for mine. I just drilled out those pop rivets and went from there. MEADOWS. <<<CWB>>>

I just got my new stator and it said something about an air gap. Whats the deal with that? Do i have to mark where my flywheel was sitting before i take it off? Thanks for the help. MEADOWS.

I'm not splittin the cases, just takin the covers off of each side. MEADOWS.

We dont have rocker arms, valves and things of that nature. Just pure power. SCREW THE CRAPTORS. Not to hate or anyhting at least it a YAMAHA and not a HONDA. <<<CWB>>> MEADOWS.

So what if i left the rear the same but dropped to a 13 in the front. Would i have to change the chain?? That would be more low end. But how come raising the rear doesent even it out?? Why would it still be low end if u went up one on both?? Thanks for the help. MEADOWS.