banshee x

got a lower engine mount from him(strut type dog bone) in good shape at a good price thanks again!!!!!!!

ok i'll keep tryin just no real good at jetting but need to learn thanks!!!!

not to get off the subject of this post but loco your runnin 162 mains and 45 pilots i just put together a 4mil drag ported cub,v-force 3,35 air strykers ,21 cc custom domes,shearers and i'm working on the jetting i'm up to a 55 pilot and 155 mains did a plug chop and it still looks too rich whats your elevation im at 3,000 feet but normally dune at 1000 ft am i doin something wrong????

thanks for the coments

and another

more

more pics

THANKS

got a pure black stock one says yamaha on the back pm if interested like new

Maybe i am outta my md but the full bores had some deep scratches and some stress marks

A friend of mine bought a banshee last week and has been trying in every way to get my red fullbores from me. The banshee he got had some nice red stock plastics with yellow/gold/grey ghost flames w/gold flake painted then clearcoated, I swapped him staright up for a plain set of red fullbores and stock seat cover for these. I usually cut my fenders on all my bikes or order race cut plastic but i'm havin trouble with the thought of cuttin these Check out my gallery for more pics

no the acc wire would be the red one,also like a ign wire(switched power) when the key is on current passes to this wire thus giving your head unit power when installed correctly.if you want to hook straight to the batt. you just hook both wires to the batt or the starter relay(big-2-4 gauge wire coming from battery to relay),and make sure you put an inline fuse on the yellow wire should be labeled batt in the harness coming from the head unit.Dont hook up the illumination wire that might be a problem on that old of a vehicle(orange/yellow wire)......I would suggest hooking the batt/yellow wire directly to the battery w/in line fuse(30 amp green),and go to your local auto parts store/stereo shop and buy a connector that goes directly behind one of your fuses (from the fuse box to something like your a/c,heater fuse for your switched power) this connector will have a male spade to plug a wire into.put the red wire to this and your stereo should work fine.check your ground location(s),you could have a bad ground on your lights /stereo causing a problem with the two circuts.Good luck pm me if you need any more help-I was a certified installer for Clarion for about 3 years!!!

i might have a set that are already bored to 28mm with k&n's and a cable i will know by the weekend might be a dead beat e-bayer http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMESO%3AIT

sorry already gone

Thanks Jeff!!!

i'm also inerested although i'm whatcha call a larger rider got a 6" arm, wont hit the dunes again till oct 8th for banshee wars,dumont maybe even if you've already decided on some on else what would it cost to have my stock shocks re-valved and springed for my wieght thanks adam

I got that street bike clutch,easy spring about a week ago i'm so anxious to get all of my engine parts ,i put the clutch together yesterday(loose in the basket anyways) i was supposed to ditch the large o-rings that went on each friction plate??????

i would like to get a boss intake for my new cubs nobody wants a nice intake for $100 bucks????

comes with boost bottle,billett prodesign intake and manifolds wth bolts, increases air flow i had to rejet $215.25 new with tax and shipping plus 15.00 per 35mm carb boot plus shipping need to sell asking 100.00 shipped thanks for info http://www.qande.com/pd/page6.html and scroll down a little

thanks unfortionally i bought then from pro flow didnt know jeff sold carbs but thanks

tci twist throttle with cable for stock thumb throttle with cable no tors

99 ds 650 it is yellow but has all of the baja stuff on it/lights,tach skidplates.it has a stage 2 kit which includes a carb,ignition box elimanating the rev limiter,intake,k&n filter,silencer and some other stuff but not completely sure.I told my friend i would post this to see if anyone is interested.He bought this bike for his girl and they broke up so he doesnt need it anymore and wants to put some money in his shee,the bike is located in arizona and i can get some pics if anyone is interested,there is not much riding time on the bike mostly dunes. as clean as this is he asking 4000.00 for it thats about 300-400 under the goin rate for a stock one without listing it in the trader around here anyways!!!!

Dont know what happened to the circle???? it is the part on the right not the strut/dogbone just the bracket on the right thanks.....adam

I need a left side strut to frame mount its circled in the pic i dont know if it makes a difference from left or right they both look the same,my engine will be back next friday and i would like to replace it before then thanks!!!!

bought some heel gaurds and front bumper,just as described,shipping was fast awsome thanks again my buddies super happy with the stuff