banshee x

Yeah i Know But I told him I would post it.

I've got one i would sell also its in the swap and trade if anyone else is intrested in one 65.00 missing one piece.....Adam

97 Banshee with a 68mm bore(stock cylinder) 4mil engine ported by trinity.Trinity single 38 mm carb.Transperant blue powdercoated frame with all useless brackets removed.6" swinger,+2+1 lonestar chrome a-arms Dura-blue rear axle,works front shocks w/outerwears.Mariner race cut plastic with skin graphics and seat(blue).Tag handlebars,blue extended brake lines,everything billet,chrome or powder coated(except cylinders) Listing this for my puss friend who would rather ride a Raptor 700 Than this banshee He wants 7000.00 for it the bikes located in Kingman,Az I will have pics up Tommorrow!!!!!! Any ?'s Call 1-928-530-5331 ........ Adam

I have tried the o-rings that came with the pipes,fmf's,stock yamaha's,and cpi's they all have leakes and it makes a huge mess all over the bike ,my pants and boots.I have put several bikes together and never had this problem.Any tricks or o-rings that seem to work better.......Adam

Call jim at passion definatley my vote is for jim

need a slip on aftermarket used silencer for raptor,rear paddles for banshee/raptor or ????? i know its not worth much and it is missing a mount or something(have the mount to the frame and stabilizer missing the piece on the bushing end) sorry i dont know much about these......Adam

The difference is the stroke 4 mil is pretty common and not as expensive as a 7 mil,it just depends on how much money you have to spend and what kind of riding you'll be doing

Jim does a nice job i couldn't be happier with mine as well I hope jim talked you into some shearer inframes if not save up for some !!!!!

rmatv $278.00 shipped for banshee red label douglass wheels and extreme grip 10 paddle

I agree jim is a hell of a guy.He drag ported my cub and its unbeleivable, and he can hook you up with everything you need for a good price!!!! Then call Jeff at fast and get his streetbike clutch You'll need it!!!!! Good luck......Adam

having trouble findin any parts does anybody know of any body or place that might have a few parts they just keep adding up.My friend apparentley didn't keep track of the old parts if anybody can help i would sure appreciate it!!!! new parts added to the list!!!!!

no its legit the guys just not mechanically inclined at all took it all apart to have it powder coated and never put it back together

as of now i need a dash bezel(holds the key switch and lights) -key switch w/key of course -air filter -stock legth chain -front spindle nut with washer -upper engine mount -lower front frame to engine mounts -gas tank bolts and sleeves i bought this bike in a box with a fresh powdered frame,686 motor and new tires and wheels with a title from a friend that needed money so i sure i will come across some other stuff Thanks adam

Found the ball welded to the adjustment side short rod and the longer rod kinda tached to the clutch actuator(arm) now i'm having to use a dremel and clean up the shards of welded material at the end of the rod to remove it from the case what a pain in the ass

Yeah I'm going to pull it apart today and see what happend.Jim hooked me up with that same info on the pancake bearing.I'm going to have to get one.I do have an easy pull lever already,but i'm going with that hydrolic clutch from magura. Thanks for all the feedback guys!!!!!!

yeah got that f.a.s.t. racing clutch with all six springs installed talk about a pain to pull

another pic

after racing up comp at dumont saturday morning,coming down the hilll with the clutch pulled in i was getting to the bottom of the hill and the clutch lever pulled out of my fingers and this is what it looks like any ideas why this happened?????

I agree that why my 4mil cub will be just watchin good luck to ya!!! i've seen Ruebin's bike run its fast (4mil alky aka rapidbanshee on p/s) see ya there

no Redlined i saw your name in the 4 mil class Good luck!!!!

clean, have cash in arizona,nevada & california area must be toy hauler w/shower,fridge,toilet,a/c and heater and queen upper bunk thanks ......Adam

See ya all there!!!

i'll take one pm me for address

Cool See ya there

As far as i know the 8th is the date.who is all goin from the hq? it would be cool to meet some other hq's. I'll be up friday afternoon parked in front of the big hill in front. We park down the road quite a bit,dont like all the traffic,it gets real deep down there so you'll need a four wheel drive. But if anyone wants to meet up let me know. i will be in a big circle about 4-5 toyhaulers and about 25 people 7-8 banshees see ya there....... Adam