greg_banshee

Any TM34's out there for sale for a reasonable price? Let me know Sent from my iPhone using Tapatalk

I just run what the manual says for the gear box (10w40 yamalube) and usually either Bel-Ray H1R or yamalube 2R mix at 40:1 or 32:1. I agree with GRAVEL...run what ya want & if your unsure read your manual! Sent from my iPhone using Tapatalk

Hey i'm trying to jet my TM-34mm Mikuni flat slide carbs and it just doesn't seem to be working out for me... i'm getting frustrated. What would be a good starting point for me with these carbs? (Mains, pilots, air screws, needles) Mods are: Dune/Play port job (stock cylinders) 66mm Bore case matched pistons are window matched 4mm Stroker 5mm Long Rod Chariot Billet intakes VF3 reeds Pro Circuit exhaust +4 timing Uni Pod filters Elevation is at sea level any help would be great thanks.

I never had a problem with yamalube 2R now I never did try the yamalube 2S, but really like it has already been said if your fouling plugs then your too rich. The yamalube 2R is the performance oil which is semi-synthetic, the 2S oil is just all purpose oil which i can't see why it wouldn't work. I use the 2R in my 1990 RZ350 with the autolube pump which mixes at 20:1 & i've never had a problem but i run Redline Synthetic in the Banshee.

Bump nice bike ! Wicket price, wish i had the money .... but a banshee, Blaster & an RZ350 ... its like having 3 kids hahaha

Hey if anyone has a set of stock headlights that they would like to get rid off, either give away (i pay shipping) or a good price let me know. Thanks: Greg

thanks for the info yeah i'll just buy a good used one & get it lightened (don't want the down time) and does it actually make a difference ? should of been the other question i asked before haha

Hey just wondering what i should do here, i want to lighten my flywheel ... should i order a ricky stator flywheel & get it lightened or order the ricky stator flywheel wait for it to come in & change it with my stock flywheel & then send my stock flywheel out to get lightened ? & also where is a good place to get them lightened ? i'm in Nova Scotia & don't mind shipping it to where ever just want a pklace that knows what there doing. thanks for any replies fellas !

i've been trying to find a website where i can find mods for my RZ350 (street bike), I want pipes, i know like carbs & shit are all interchangeable but pretty much just looking for some pipes if anyone knows that'd be cool thanks.

hey i'm looking for a set of front hubs & rotors & also looking for a front master cylinder with the flex hose. let me know what ya got. thanks: Greg

hi looking for a blaster frame with a clear title or papers, starting a project bike for the woman. and you also need to ship to Canada thanks: Greg e-mail me or msg greg_banshee@yahoo.ca

post some pics of how bad your cylinders are ... i had mine blow up last fall ... it was really bad gauaged one cylinder wall 0.035" and i was 0.020" over at the time but still was able to get it bored out. i'd bore it.

Thanks sredish ! i might look into that and as for you The Grinch haha i guess i shouldn't be letting my secrets out hahahha j/k

Thanks fellas :beer: ! yeah i figured but just wondering, i think i'll just suck it up and mix my fuel with AV-Gas haha

is it alright to add octane boost to high test fuel to run in the bansheethe reason i ask is race gas it way to expensive here well 110 octane or 112 what ever it is but just wondering if its a safe way to add octane points to my fuel ?

i think theres supose to be 2 o-rings i know my pro-circuits have 2 one inside the pipe that goes against the end of the exhaust port & one on outer flange... i had same poblem & i replaced them 2 o-rings and no more problems

Congrads man !! yeah thats ok i just hope spike & his buddie are still good to go, & yeah ... i might be up for a ride next sunday too, just have a Semeins course on saturday but hell i'll still come home for a ride for sure just let me know !

yeah i'm pretty sure its exit 19 (Salts Springs) exit is the one your looking for, & for cops or lands & forest ... nah ... never don't worry i haven't registered my bike since i got it (4 years) no licences or insurance

yeah well ... durham close, Brian is his name & he thinks hes gona hit 100mph this year haha hes a good fella, yeah weather permitting Sunday August 12th sounds good ! yeah man we'll get you directions its actually pretty easy to find & we'll all meet at the Salts Springs exit & then the pit is just down the road :biggrin: & yeah the more ppl the better ! i have a few other fellas that will come too

yeah theres another fella around here he's quite a banshee fanatic he'll go for sure he's out there every weekend anyways haha, yeah like the second weeeknd in august would be good for me cause i work the first weekend of shut-down which is the first weekend of august so does Sunday August 12th sound good ? :beer: pm me or leave a msg if it sounds good we should try to get a few fella's from NB to come down and then we'd have to go to NB for a ride, that'd be cool !

yeah i had to same problem before i switched to 28 flat slides ! that seemed to solve the problem, them 26's are junk chuck em out & get some 28's or bigger

alright well get er together & we'll plan a day to get to the Pit anybody else live in NS ? must be more then 3 of us ?

Yeah lets hope your up & running soon ! yeah the Salts Springs turn off is where we could meet then the pit is just 5 minutes down the road. need anything else "the grinch" ? i have lots of extra parts

Hey man yeah no i don't have either if you know what size the dowel pin is i can get one at work n/p ... if i recall its either 4 or 5mm dowel pin eh ? let me know i'm workin 3:30-12 this week so just leave a msg & i'll see what i can do !

oh ya & as far as where & when ? ... i was thinking 6 Mile Brook, sweet gravel pit lots of room to play & lots of dirt roads to run wide open, big hill face to climb ?? anyone else have any other suggestions ?