sheecandy

yea i love running the flat drags at pismo i plan on going this summer whos going!!!

i had pro circuit dual k&ns v force valves and ported cylinders 32.5 pilots 5th click on needle and 350 mains ran great at sea level

rev it up as you put it in neutral works for me

oh elmer you got me excited i thought you were going to say gorden wells in cali oh well have fun

first i would redo the bottom end new crank and seals if you have a shop do the work ask about a package deal rebuilding your bottom end and some dune porting while you got your motor out have your frame powdercoated if your pipes are in good shape i would just clean them up and repaint them make sure you rejet for all your new mods oh yea dont forget some skat trak paddles on douglas blue lables have fun

I think im in love

i went from a polaris 325 trail boss to a stock banshee not much of a differance...yea rite i only use the polaris to go back and fourth to bathroom when out at glamis

whats up guys gas in socal is getting bad 2.80 for 91 2.50 for 87 the bad thing is i have to drive about 120 miles round trip to do any riding my suv only gets 10 miles per gallon yea starting to get a little expensive oh well im out gotta go do some riding late

WHATS UP i had racers edge in riverside ca do some dune port on my old motor WOW that thing ran killer they also milled my stock head best 400 dollars i ever spent They also did my 7mm stroker and drag port they do good work later

whats up guys shee420 in da house from glendora ca west coast guys we need to get together to tear up the dunes im down for 4th of july at pismo keep us posted later

sounds like a killer deal get the deal in writing and keep a paper trail of all your payments

Whats up guys just became a new member bansheehq is awsome I use to do the 5.0 drag race thing but somthing was missing I always wanted a quad so I bought a couple of four strokes that was fun for about a day then I went to a used atv dealer and the guy told me if I was ready for the big time and serious about sand riding to get a banshee two years later I turned my stock banshee into a 80 horsepower hill shooter and bought a 04 red&white for my wife, I'm also new to computers and I checked out every site on the planet about atv and banshees, but nothing compares to the HQ this site is bad ass glad to be here later shee420

200 should be ok id put in 240 and take off the snorkle off the air box lid it will make a nice difference

300 should be close I had similar setup on my 04 and it ran great

i would go with 300 since you dont have a airbox lid have fun wish i could go

yeah i would get the plate go with +4 on the timing the extra timing will compliment any future mods

banshees do have reverse get off the qaud and pull back on the rear grab bar

i would stick with the stock carbs if you ride close to sea level id put in some 320 it should run pretty hard with thoughs mods

oh yeah put in the 320 like ducman said it will go up in 4th no problem

if its easy to get i would put the stock tube back in if you get the boost bottle you dont need to rejet you wont gain no power out of it either maybe a little more trotle response

I had 14-42 and 20x10x10 haulers, with similar set-up worked good at olds