njbanshee

Yeah, a lot of the guys were complaining that the weather was killing there times. It was my first time out so i have no comparison. I hope to break into the 12's next time out.

I was running the 1/4 mile but you still get times for the 1/8 on the time slip. I know i can run better but i think those are good times for my first asphalt drag.

4 mill stroker port and polished, lockup clutch, cpi inframe, 33 mm carbs, coolhead 18cc domes, running vp 112. I run a 17 tooth front sprocket and i think a 41 in the rear. I just checked my time sheet and i ran low 8's in the 1/8, but thats with a 17 front sprocket. It should be low 7's with the right setup.

I finally got the bike out to the track. I ran a 13.3 at 95 mph. What kind of times are you guys running with what kinds of setups? I just wanna see how much more work i have to do.

Just got back from the track and i ran a 13.3 in the 1/4 mile, 95 mph

I'm looking to buy some paddle tires for shee. I would prefer some haulers, but i will consider anything you have. If you just have the tire for sale it must fit a 10'' rim.

I fixed it. It was a loose wire.

I found the problem and i plan on heading back out to raceway park this wednesday night, the 26th. Hope to see some HQers out there.

any more ideas, i'm gonna do some work tomorrow.

Sounds good, i'm still trying to fix the problem. Should be soon.

How far north is middletown NY?

I can't ride the bike around. It idles and thats it. It will not rev at all.

I should have wrote this sooner, but i have aftermarket everything on the bike. I have no parking brake, i have 33 mm carbs, and i have a dyna egnition. That litttle black box on the front left is long gone. I even hooked up another dyna egnition to see if mine had failed. The results were the same. I think my next move is to take the carbs apart and inspect them. Keep the suggestions coming guys.

I'd go as long as its not too far west in PA.

I'm gonna f with it today and try some new ideas. I'll keep you guys posted. keep the good ideas coming.

I don't have one.

My bike was running great, then one day i went to race it and now the bike won't run right. It will start up on one kick, but when i hit the throttle the bike makes a wa wa wa wa wa noise and never revs up. If i let off the throttle it goes back to a near normal idle. Any ideas would be great.

Last friday was gonna be the time at the track, but when i got there troble started. I went to start the bike and it will idle fine but will not rev up the engine at all. I have not yet figured out the problem but i will soon. I have never had the bike on a dyno, but i figure i'm pushing mid 80's hp. I've seen near stock bikes run out there, so what ever you got is fine.

I guarantee the snake will eat, he's a beast.

I can't post pics so there is no chance i can figure out how to post a video. If you go friday night i will have camera and i could show you on that. Thats the best i can do.

post some pics

I went on sunday and the banshee's were crazy. They all ran 6 sec 1/8 miles. I got video and everything. I still plan on running this friday night. Lets see what you guys got. If not come check out my bike and say whats up. I'll be on an all black and chrome banshee.

ttt

He is an excellent eater. Watching him eat is one of the best parts of owning him. i feed him a couple large mice. No pics right now but i will try to get some.

You can run quads on wed and fri nights. I gues you can run dirt tires if you want. I'm going wed to watch the monster truck show and then friday night i'm gonna run the banshee. who wants some? I'll see you guys there.