g_low0885
-
Posts
91 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by g_low0885
-
can you used the cubs if you do mostly woods riding
-
can you used the cubs if you do mostly woods riding
-
clips that hold on a DG skid plate
g_low0885 replied to g_low0885's topic in Banshee Repairs and Mods
thanks to tim c Phone # 866 630 5424 / 714 630 5471 website - www.dgperf.com -
i have lost 3 of the clips that hold on my skid plate i wanted to know if anyone knew where to order some or if anyone has some laying around.
-
will the + 7 give very much more power over the +4
-
i am going to build either a +4 or +7 long rod moter my question is the +7 going to have to be rebuilt more often. i read somewhere that you are suposed to rebuild the cheeta after 200 gallons of gas is that the case if you used +7 or +4?
-
motul 800 at 70 to 1 very clean moter looks as clean when i take it apart as when i put it together.
-
in indiana race gas goes for about 4.50 for 110
-
i need to get a breake pedel would like to get a pro design one if any one has one laying around. put my clutch on my shee and my brother decided to clean out the garage while i was wating on parts and now cant find it. a stock will do if i cant find a pro design.
-
i have been told that if you have over 160 psi that you need atleast 100 octane.
-
you can geta MSR raptor from rocky mountain for a little under 40 shipped
-
where to get a white brothers clutch
g_low0885 replied to g_low0885's topic in Banshee Repairs and Mods
what kind of springs would i use with these? -
delta v force
-
i want to get a +4 long rod crank and want to know if you have to use the wiseco 795 pistons or can you use the vitos if you used to space plate, the thicker base gasket, or cut the head deeper?
-
not sure on how much bigger but i know that the jets need to be quite a bit bigger to run alochol.
-
i want to get a white brothers clutch 4 my banshee does anyone know a web site to get one from?