leadsled

how much do the 4mm cranks cost and who could do the minor port work for a decent price. i still want that light switch power hit so if anyone can recomend a good builder that be great.

but what exactly needs to be welded on the crank?

where in florida do u live? maybe i can help you out since i live in this hell hole.btw if its in douth florida like miami or carol city stay away from it most likely its stolen or has a ton of problems iv had an experice or two with banshees in those places

race gas is not a problem im already running it since my brothers kx250 needs to run 110 leaded so i juts quit filling to seperate takes when he just pays for the gas in the bikes and i just drive. but what exactly needs to be welded on the crank? and getting it out should be to bad iv done much worse

ok i just did a compression test on my shee and it has 145psi in each cylinder right now it has pipes k&n filter,boost bottle and a cool head, i want to put on a timming plate and advance the timming and also change out the domes to 18 or19cc , now the crank hasnt been welded or trued and i want to know if this will need to be done, if i do these mods before i go ahead and order this stuff and if it does need to be done who can do it and or is it something i myself can do i have access to a good welder i just need to know what it is to weld? and by doing these mods how much HP could i expect?

was done in an old magezine article i posted a bunch of quad times before i will see if i can find it again. i know forsure the quadzilla has about 7mph more then what the banshee had in these runs and i think they were 1/8th mile times not sure tho

because the question you asked has most likely been asked before try doing a search next time no one answers your question.oh and it might help to wait more then 10 mins for a reply and i dont think it helped that you called ever fag's but i could be wrong

ok ok.ready? KNOCK!!!KNOCK!!!then you say whos there? and i say GO FUCK YOURSELF!!!! just give up ur lame dude

castor 927will make your engine explode and throw the conecting rods into balls i highly recomend you do your shee a favor and ride it into a lake and leave it there

RC10GT offroad truck is badass i have one i built and it has all aftermarket parts with a badass .12 motor in can email u pics if you like and also its forsale or trade and also a RC10 L3 oval racer with all the goodies lots of carbon fiber.

i have a 1999 dodge dakota R/T 5.9 limited edition.bought it used cause they quit makeing them in yellow in 99 and i wanted one in yellow. i got it in 01 great truck never had a problem with it,it has a K&N cold air intake on it and a flowmaster two and a half inch cat back exhuast.stock they put out about 250 horsepower and 345ibs of torque. think they go for about 25k but they just made a new body style so now you can prolly get an 04 R/T for cheap.in my opinion dodge makes the best trucks out on the market right now,oh my truck gets 12.9 mpg but on the highway iv had it get 17mpg i just have a heavy foot and love blowing these little ricer cars away even when i got the shee in the back i can still burn the tires like theres no tommarow

sent u a pm

i need a set of upper a-arms stock,with good ball joints.some aftermarket chrome pipes and a set of yfz front shocks let me know what ya got and whats the price.thanks

you have a pm

i run 93 octane in my shee at the moment with a cool head, bills pipes, and a K&n. i was wondering if changeing dome size the same as shaveing the head on a stock shee head i mean does it add compression and what not so you have to run race gas i dont know what size my domes are in my head right now and im at sea lvl i was thinkin about changeing them out to run race gas if it was a good performance adder.but im still new to most of this stuff so any advice id appreciate.thanks

im running a good set of bills pipes and silencers at the moment but im looking for more top end grunt these are great low to mid pipes there are no dings or dents in them im willing to trade them for another set of pipes or i will buy a set of used good pipes chorme or bare doesnt matter i will post pics of pipes when i can.

down here in florida theres a dude who can beat pretty much any banshee around here with his cr125 this bitch is bad ass i dont know the guy personaly but i will soon as i get his number for port work he used to ride shee's but know his on dirt bikes this cr125 is gear and ported iv seen it beat 2 370cc shee's with no prob on the line and out the back door i dont even come close to him he also has a cr80 he drag races on the street against cars for money hes wins all the time, my advice to you is find someone who can do port work on those motors cause they can run like hell. and i know ppl are gonna say well those guys and i on the shee's just cant ride well we can and our bikes just cant run with this thing every time i see him i say how the fuk you beating all these shee's and he just says its all in the porting...........

im looking for a good set of used toomey T5's or ROCKETS bare,if anyone has a good set of bare pipes let me know a price and ill see what we can do from there.thanks

i run bills pipes on my bike they came on it when i bought it. there a good low end pipe and have a good strong midrange as far as top end i think there decent but iv never tried any other pipe except pro circuts but those where on dirt bikes so that wont help but i think there good pipes for the price.

where u live in florida? im in miramar.

ya make sure you kill all them rabbits god knows there only the most bloodthristy animal alive right.......

i run a set on bill's pipes on my banshee and i was wondering if anyone else has used them and compared them to other pipes i think there a decent mid-top pipe, i have yet to see another banshee with them on it.

ill give ya 100 bucks

i need ethier 2stock lower A-arms in good condition or a set of aftermarket ones for a decent price plz hit me up.thanks

heard some bad reviews on asr's so there not gonna be my first choice but if anyone has any aftermarket ones forsale hit me up