87sheerips

Nicely put Dan! lol... Im sure in a couple weeks the site will look fantastic, give us some time and everything will be squared away. Dan has been workin his ass off to get this going, cant thank him enough!

I powdercoat in a variety of colors. Stockers we cannot do because of the ball joints. $15 an arm plus shipping. let me know if I can help!

Thanks for all the input and suggestions! I didnt know about the activex thing, I havent seen that! Can u send me a link to this google stuff youre talking about? I agree with you, the intalled pic should be on the front page next to the grilles by themselves. Well try and button that up.. They are in the forum section under "installed grilles" Yea, $200 for frames, $50 for all front arms + shipping of course. That includes bake-off, 7 stage wash, zinc primer, paint, and clear coat if desired.

Yea, we still have to load up the PC color choices, pictures of PC'd parts, etc.... Im guessing within a week, the site will be pretty dialed in. Dan is workin hard to make it happen.. Let me know what I can do for you, im only about 1.5hrs south of GR.. -JD

No, no, no brotha, youre the only one that will ever get that piece! Thanks for the input Dave, it should be a lot more tuned in by the weekend. Please register and post up pics at will! -JD

Many thanks to bansheedan for helping me get this site going!! Check out www.jdscustoms.com It is still well under construction, but it has pictures of my products, even a forum section for general discussion, and customer photos. Feel free to register, post away, and enjoy the site. I would like feedback good or bad on things you might want to see on the site as well. Start new topics in the forum if you want, Im looking for it to turn into a site where people can post feedback, suggestions, etc...and dont forget to turn on them speakers jammin out to insomniac radio live! Stay tuned for a for-sale page for which paypal can be used to purchase any of my products. Thanks to all you guys for the continued support which allowed me to develop a site like this! :beer:

damn man, i was all excited just reading that!!! great to hear a good ride report keep it up and share some vids!

Thats true... I had it wound out in 6th, it felt good and didnt break up at all. I think a 165 main should get me safe, Id rather be a little rich and just run it. Ill put some old plugs in there, and check it after a 6th gear rip. Thanks for the advice! -JD

Nice, Ill leave the pilot cuz it runs great down low and at idle. I have a 165 Ill throw in, then a 170 when the real cold hits. Thanks for the tips bro... -JD

really, i was thinking main... How do you determine, by looking at these plugs, to bump up the pilot??

Just switched back to gas and want your opinion on this initial reading. I was ripping for about 20 mins, shut her down peaked in 3rd gear. This is what I have.. K&N pods, 35mm PWk's, VF3's, aggresive dune port, 160lbs comp, +4 timing, CPI inframes.. Jets: 160 main, 52 pilot. My thoughts are to fatten it up just a tad, let me know what you think!

I live in white pigeon/Union area down here. We have 6 banshees in our group that are also looking for places to ride. Where do you/ have you ridden in the white pigeon area? Good to know others are around over here on the southwest side!

Hey, that radiator region looks familiar! Bump for a good lookin banshee... :beer:

Well I put in 160 mains with 52 pilots and its running prime!! Actually, I think it makes more power now than with alky. That tells me I wasnt feeding this thing enough alky. Guess Ill have to drill those jets out more for next summer season! Thanks for the advice guys.. -JD

myspace.com/jdubswmu

Im in Michigan, and Ill actualy will be riding on the ice, so pretty much sea level. Mods: K&N Pods, 35PWK's, VF3's, Aggresive dune port, 160lbs compression in each cyl., +4 timing, CPI inframes.

Whats happenin guys! Well, im letting the 34mm alky PWK's hibernate while I try out these 35mm PWK gas carbs i got from a buddy of mine. They currently have 188 mains, and 40 pilots which just sounds WEIRED to me. Im guna fire it up and see what it does with those jets, but it just seems wrong. Let me know if you have any advice for me! Thanks,, --JD

Seen these in person, they are sharp pipes! That sparky setup from toomey is pretty trick, this makes for a great package especialy for us MI riders..

Think you could tell him to email me at [email protected]?? Or forward me that link? I would appreciate it, thanks!

Im looking for a nice set of built Ice tires for this season. Ice picks for drag racing a must, let me know what ya go! I have a set of good year slicks moutned on rims for trade if interested. Thanks. -JD

Im JD.. Ice riding is my favorite riding of all. Thats why im waiting on building this cub until late winter. Dont want to be in the garage while eveyone is having a blast on the ICE! Still got some more stuff to dave for too like override and all that jazz...

fountain, I just found out my buddy mike bought yur old motor... What a small world! I told him to hold on tight hahahah! Now I got some work to do, guess its time to build that Cub motor.. I was thinking of waiting until the spring to build it. Not a large fan of breaking in a new motor in the winter time, i dunno, what do u guys think??

Na, im getting out of the hobby to focus on the banshee and snowboarding! haha, hell yea it should look familiar! Its a good truck man, especially with that motor. Time to move on tho...

Im also going to set up a drag track down here in Union, MI. I'm right down here at US12 and M40 on Long lake. I live right on the lake, were guna do a drag strip from the beach. Looks like we can get west MI going here Joel!! Ill have to try and get up there this winter, as should u guys get down here! -JD

I usually buy from rockymountainatv.com Klotz supertechniplate. Prices are pretty good!