87sheerips

Hey fellas, need a rear skid plate. Prefer aftermarket but will go for stock in great shape. let me know

VERY interested in the harness. Does it have light plugs? Kill switch? What is the plug connector style? PM me so we can work this out. Thanks man!

Pistons are Sold, see above. Its in good shape man, believe me. It works fine, if you want it let me know. I wont be able to get pics until tomorrow if u really need to see more detail. Everything that has been paid for has been shipped. Thanks guys, and still a lot of parts left!

I cannot edit, I wish I could so help me out lol. You can delete my second costing post please and thanx bro.

I have a like new set of protapers that are slightly tweaked on the bottom but fixable. $15 shipped let me know. Comes with pad and grips.

My CPIs have seen better days because of abuse. They still clean up great i cant believe it. That is completely unacceptable quality right there. I'm sure they will make it right.

LOL, sounds about right!

Item # please sir........

What is SOLD (Paid for). as of 3/10/10 @ 10:00pm 4. Front rims (pair): 7x10 Gold, $40 for the pair 9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50 14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10 19. Wiseco pistons, bore measured 63.25” ( I think they were .020” over so whatever that is lol) good shape, come with rings, pins, clips and good wrist pin bearings. $30 20. A-arm inner shaft: $8 31. Rear wheel hubs PC blue $30 for pair 38. Amp Link, aftermarket chain roller: $25 37. Stock foot pegs 2. Paul Turner High Rev pipes, new high temp paint, nice pipes: $200 23. Axle locknuts: 1 for stock axle 42. Front Brake master cylinder, bad shape but do work with good levers, 2 available. $10 each (BOTH SOLD) Send me offers guys, still nice parts up for grabs. For instance: Full rear brake setup with new braided line, up to +12 Up to +4 rear stainless line Trinity Pipes Quik-adjust clutch perch and lever... Read over the list, I will keep updating with the "Sold" list, so everything else is still available Lots more up for grabs, hit me up for offers, everything is negotiable besides the pipes.

Thanks guys, and this stainless material is harder and wears well. Based on the rear rotors that I have used and sold, I have heard nothing but good news so same should go for the fronts. I have a set being made this week yet, if anyone needs a set let me know. Thanks! -JD

Ok guys, after a few requests i decided to design some front rotors. This is based on the stock design, and for safety reasons, I will not get to crazy with the custom designs (hope you agree and understand) SO, that being said, here is a slotted design which will be cut on 10ga. 403 stainless steel. $90 shipped for a pair in the USA. or $150 shipped for front pair and a rear of your choice (either slotted or sawblade) All things considered this is a great deal guys. Let me know what I can do for you and thanks for the continued support!

What is SOLD (Paid for). as of 3/10/10 @ 6:00am 4. Front rims (pair): 7x10 Gold, $40 for the pair 9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50 14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10 19. Wiseco pistons, bore measured 63.25” ( I think they were .020” over so whatever that is lol) good shape, come with rings, pins, clips and good wrist pin bearings. $30 20. A-arm inner shaft: $8 31. Rear wheel hubs PC blue $30 for pair 38. Amp Link, aftermarket chain roller: $25 37. Stock foot pegs Lots more up for grabs, hit me up for offers, everything is negotiable besides the pipes.

Heres my stocker semi-cut with a bolt-on Stellar subframe. All I know is that its lighter than stock. By how much? I have no clue I just ride the damn thing

Come on Dave, you know I run my best times not having a bar .....lol That was a good pass, man those guys have some cash overseas. All you see is bad assedness over there

Guys, still a lot of nice stuff up for grabs, i.e. pipes, stainless rear brake line, complete rear brakes with NEW +12 stainless line, crank, crank bearings, grab bars, etc... Check it out I will wheel and deal and hook you up CHEAP. Seriously. What is SOLD (Paid for). 4. Front rims (pair): 7x10 Gold, $40 for the pair 9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50 14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10 19. Wiseco pistons, bore measured 63.25” ( I think they were .020” over so whatever that is lol) good shape, come with rings, pins, clips and good wrist pin bearings. $30 20. A-arm inner shaft: $8 31. Rear wheel hubs PC blue $30 for pair 38. Amp Link, aftermarket chain roller: $25

Some better pics of pipes, etc. Trinity Stave IV. $350 SHIPPED FIRM Paul Turner High Revs. $200 SHIPPED FIRM Rear grab bars available Pistons, crank, etc All parts:

LOL, all I think of when I see your screen name is broken ass silencer LOL... Still hammering on it WOT!!!

Paypal me now and its a done deal. The 2 front master cyls are pretty junky but you can work some magic on the rear caliper. I have a PM for the rear caliper, but at this rate its first come first serve guys. I have PMs flying in and I can hardly keep up BE SURE to include descriptions of what you want on paypal or my life will be hell. Thank you!! Brad, I do not have any front exhaust hangers. Same goes for the pipes, Ive had about 4 PM's come in at the same time. First person to pay wins. Its a good deal for nice pipes, these are like $700 new! You will get refunded if you pay, but got beat to it. These are the best pics I have of them. Trinity Stage IV stainless steel, come with billet silencer mounts too

OUCH my eyes

Items SOLD: 4. Front rims (pair): 7x10 Gold, $40 for the pair 9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50 33. Rear Brake hub, raw, with rotor, useable: $10 14. Hinson Billet cutch basket, has damage and bolts broke off. Could be fixed? $10 38. Amp Link, aftermarket chain roller: $25 20. A-arm inner shaft: $8 THANKS!

I will definitely trade you some PC work for this. As long as its not to insane of colors, its a little hard for me to get crazy custom stuff. Anyways if this sounds good call it a done deal. This would look awesome on either of my bikes Only thing I will not paint is Cases.

This is upsetting, I thought he had a good rep. here?

Thx for the heads up Cam, shouldn't be a big deal. Learn something new everyday

SOLD on Ebay for $93.50!

Items SOLD: 4. Front rims (pair): 7x10 Gold, $40 for the pair 9. Complete rear brake system w/stock line, blockoff plate & brake pedal. Good pads. $50 33. Rear Brake hub, raw, with rotor, useable: $10 Thanks guys, and remember everything is OBO. I just need this stuff out of my shop.