98bonerSTOCKshee

yep..yep.. if you got the room.! I was draggin a bran new 450 last year. I didnt have the pipe yet, he was stock and we were neck to neck.. who ever got the start ussually took the race...@250' sand drag.

Your killing me with the Benny Hill clips, please don't tell me that was you... LOL!!

I didn't think so, this guy on Ebay is selling the Banshee CD info, here is what he's got...Dumb Phawk! http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2457565990 5. banshee ATV race wiring harness SETUP: BELOW U WILL FIND MODIFIED WIRING SCEMATICS FOR YAMAHA BANSHEE TO: A. ELIMINATE THE FACTORY T.O.R.S. UNIT: B. ELIMINATE THE FACTORY REV. LIMITER ASSEMBLY: C.KEEPING HEADLIGHTS / WHILE ELIMINATING / TORS/REV LIMITER AND KEEPING FACTORY RUN-STOP SWITCH: D.KEEPING HEADLIGHTS / WHILE ELIMINATING / TORS/REV LIMITER/ REPLACING =FACTORY RUN-STOP SWITCH WITH A DEAD MAN KILL SWITCH : E. NO - HEADLIGHTS / WHILE ELIMINATING / TORS/REV LIMITER AND KEEPING FACTORY RUN-STOP SWITCH: F. NO - HEADLIGHTS / WHILE ELIMINATING / TORS/REV LIMITER/ REPLACING =FACTORY RUN-STOP SWITCH WITH A DEAD MAN KILL SWITCH : HAS ALL THESE WIRING CONFIGURATIONS FOR ALL YEARS OF BANSHEE //NEWER AND LATER

Do banshee's have them and Is it possible to eliminate the rev limiter, and what effect would it have ???

Dude I checked out your videos. Was that The Benny Hill theme? That sh!t was sweet.. The link to http://home.comcast.net/~kooljohn5967/reas1.wmv isnt working.. What program you use to make the " .wmv" files?

watch this one.. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5&category=1468

how many gallon is the tank?

Hey guys, My wife has been riding a '85 honda atc 250sx she needs a quad, We are wanting to sell the 3wheeler first. It's near mint condition I can probaly get $800 or more if I list in classifieds around here easily.. My question.. Should I try to sell on Ebay with a reserve? Would parting it out on Ebay bring more $$$ ? How expensive are the selling fees for selling as a whole on Ebay? Should I just list in my local paper? I have never dealt with anything this big how much would shipping run?? EBAY it's an Addiction...And not my addiction of choice...Give me A dune and I am happy

geuss that's what I get for not reading the fine print It won't happen again..

I posted a message the other day about some dresses on eBay.. Was that a no no? Just wondering cuz I dont see the thread.. No problem either way I would just like to know if I did something wrong so it wont happen again...

Big Blue I love the giggles!!

4/20 weekend is usually pretty good...but there aint one this year!

tatally kewl... Geez ya'LL guy arent talking about BADLANDS in Texas I shall presume' http://www.badlandsmx.com/

would it actually be fresh?

30 mile north of Dallas.... and no not everything in Texas is big....It's pretty freakin flat here

? cam chains ? valves?

dude I had the same problem... the Thanksgiving trip to Lil Sahara this year MY homemade aluminun rack, mounted on top of the grab bar loaded with a 6-8pack (water of course) some how manage to bend my frame about 2-3 inches on both sides from the 1st grab bar bolt motor side... I think it had something to do with the landing I had coming off the backside of a small dune.. I felt the impact, suspension compressed, and pain running through my anlkes and started up the legs.. I hammered it and kept riding..I noticed the bend a few hours later, My flag was damn near touching the ground.. I beleive the cooler full of water did it, only 10-15 pounds??? Well maybe the GFORCES made it 100-150#'s at the grab bar? ps screw the spelling..

Geuss I'll be adjusting them now!!

did you add the t-6's in this time frame?? When I 1st put my t-5's and jetted, My shee was poppin....I didn't get the stinger pipe sealed up good to the tail pipe. I tightened the clamps and wammO! Krank her up, and feel along the exhaust especially the clamps I felt air leaking. Just a thought....maybe time saving though

oops wrong thread..

I don't think he should just into a ring change... ....fresh motor needs break in ....test need to be on warm engine if it's below 110 on a broke in motor that's warmed up then maybe look @ the rings but I think it's to early.. He's getting same reading on both cylinders that's great!! ....

why isnt the YFZ 450 here? I was racin stock vs. stock I think maybe he had his air lid off. Would basically come to the hole shot. Them boys prob. would be tie with other 'shee's..

It won't. The race gas will make a motor that requires the higher octane run cooler. A motor that doesn't need the high octane will not run any cooler than on pump gas. This thanksgiving @ 'lil Sahara I used the purple gas on pump. It's rated at 110 @ 5 bucks a gallon. I did feel preformance increase, but the 'shee wasn't running any coolr..(I have been having coolant issues) My motor has stock squish, I probably was throwing a way a $2.50 a gallon as to compared to the better squiched motors that would take full advantage. Never the less I love the smell.. To add to the brain buster... This was my 3yr old sons 1ST away from the backyard ride. He has a '85 yamaha trimoto 60 (if ya'll remember them) His ride and mine were the only 2 strokers in the group. (I can't help that ) But rather taking the time to mix gas for his and mine he got the purple stuff... You would be amazed, being the father figure I am always take his ride for a test run after my clumpsy hands have tuned it in anyway..I felt more increase in performance on the TriZinger than the 'shee....

I like the smell !!! ha! ha!

Proquad101 so what motor set up ypu running... I am stock except for add ons... I geuss I could just try and see what it does for me! Probably find out that I wasted $30...