98bonerSTOCKshee

me and the wife both were able to get 2 out of 3 reports. for free at that.

time to see if it works here....

I saw a banshee out in Yuma at a local shop there that had the fender cut, looked like it was done with a demel??? is that what your talking about?

don't ride it and it will stay clean that ain't no shit

I took the baffle (it was plugged full of carbon) out of my boys TriZinger, it helped it alot. I also put a new carb on the thing.. You shoud be able to get a carb for like $150 at yamaha if needed... Has it been converted over to manual mixing of the gas? Make sure all carb holes are plugged if so.. give the plug wire a good inspection if it's old you gotta replace the whole coil on those, I used a coil off of a 87 YZ80 on my boys triZ.. These little 60's rock... The lil bastards a fun ride for me.. Even more so for the little ones!!

geez. I was goona ask you if you checked the wires from the coil to the plugs ?

you talking about the shee or the honda?

uh.... maybe. .maybe not...

are they paid for?

really the only thing going for the thing, I would go with the 450 no reverse before the raptor 350...

hum thinks I would try the R's hub first.. Is it the honda 4 110 bolts pattern on the 400ex?

now that is stupid....

yeah that's the stuff that got me, check out some of the other articles on that site it is just wrong.... here's one on AIDS being a hoax >>>>>>WHAT THA F....

how experinced of a rider are you? The raptor thing has reverse, electric start and it's a 4 stroke. The banshee is let's say a race bike no reverse to electric start and it 2 stroke you gotta mix the gas.. The banshee is a violent ride that will part the hair right down the center of your scalp.... The banshee has more performance parts advailable... The banshee is in it's last yrs of production.... Comparing the banshee and the raptor is like comparing apples to oranges.... Compare the Banshee to the YZF450 and that may be acceptable...

I work for ColorDynamics one of the leading print company's in the South.. All I can say is that it's damn expensive. Say you want to print a job on my press (which is where a magazine would be printed) it cost $500 an hour just to buy press time, that's not paper cost, ink cost, plating or even my salary plus my crew.. A 96 page magazine would break down into 6 forms on my press, We would run it prob. at 21000 impressions an hour. 6 forms means we stop and change the plates 6 times. Most mag jobs are 4/color process inks that's 16 plates per form... Oh and don't forget the bindery cost..... To make it worth wild you really need to be printing like 100000 copies or the cost is just way to much... If ya'll really need a banshee magazine just start printing the pages of the HQ with your PC's get some really big staples and WOLA!!!

this article can't be real, can it? Internet Idiocy

yeah the gum works but like everyone said you're just replacing the smoke with gum, Suppose to slowly wing yourself off the gum start out like at 1 piece per hour, then in 12 WEEKS ( LOL!!) I should be down to 1 piece a day.... However yesterday I went out to the lake and was drinkin, The wife and I broke down and got a pack, drinking and the gum didn't mix very well. Back to the gum today....

The 500's right? got me one once. At lil sahara the guy said he just bought it, so we dragged.. everytime I had him.

and now the bus is on EBAY.. School Bus this is my piston looks as if the top ring spun and then caused the bottom ring to pop out and get all squished away... that liitle spec on the side is actually the piece of ring it is paper thin now..

ok , thanks

how about down hill which quad would win?

**hell no can let this thread die** Haven't had a cig in 55hrs and counting, it's hell had to resort to the nicorete gum..

better wait for the clymer manual..LOL!! I could tell you but my brother took his book home with him last time... there shouldn't be a trick to winding the kicker spring, it's prob. got some sort of groove in the case were the spring connects, and it just did stay there..... GET THE BOOK...LOL!