SICK BOY

I got my gasket set,and oil seal set from Vito's for $49.00 for all.

I'll do this,this weekend.I'll let you know how it was. THANKS

What a great way to waste time.

Cables are adjusted great,and slides go all the way up.It just seems like other banshees rev a bit higher then mine.I was thinking about going down to 300 mains.Dry black plugs mean rich right?

Thats what I did.I think it cost me about a $1.50.

I agree that your mains are a bit small.

I got a set of Bandits fronts and rears (no rims).Fronts are 20x7x10 and rears are 20x10x9 pm me your email address for pics.Tread is about 60%.

I'll take it.Send me the shipping price to zip code 14108.

Go with white the red will blend in with the frame.

I'd talk to Dave at Noss Machine about a Noss cool head.Best bang for the buck.

Shocks are going to be my next upgrade,and Works seems to be the best value.

Don't lie to these guys the green power bands are junk I broke my green one after 2 rides.I replaced it with a HD sonic blue power band,and put the boost bottle back on and got 20 more horses at 9,000 rpm's.

I wouldn't mind selling my shee to get a 450,but it's hard to get a fair offer on a used machine.

Welcome to the HQ.

If you still have this send me a pic to: [email protected] THANKS

I went ridining yesterday,and it seems like my shee won't rev as high as it should.My mods are in my sig,and my elevation is about 700' above.I running Mikuni 28mm flat slides with 25 pilot,310 main,and needle one clip higher then stock,and air screws 1 3/4 turn out.I started at 330 mains,and the plugs were always black and wet.Now with the 310's the plugs are dry,but still black I trailer my shee to ride so doing a plug chop is sorta hard.It runs good,but I have a little mid bog,and at WOT it doesn't seem to rev as high as it should.I run Motul 800 pre mix at 50:1.The pipes still smoke pretty good even after it's warmed up,and the motor temp is good.Is my jetting off,or do I need to sdjust them different?Any help would be great.THANKS GUYS!!

Thats great,I would of loved to see that guy check on his auction.

I got a netural feedback because "I was pushy,and didn't give him enough time to send his payment".All I did was ask him if he planed on paying,because the auction ended a month ago.For every one good guy on Ebay you get one Ebay Asshole.

A little Mothers polish and a dremal with a buffing wheel works great on those as well.

I have a set of Vito's power pistons and I like them alot.Do a search ,because there are some good pics ported by Meat.And yes Vito's pistons are made to there specs by Wiseco.

Nax send me a pic of those pipes to- [email protected]

Can you post a pic?

I quit smoking 8 years ago.I'm sure glade I did too,because smokes have got pretty exspensive.

I have 22x11x10 hole shots and I run 5 psi in them.

I have mine done,and it gets to the power band faster. I think it's well worth the money to get it done.