fast frankie

chrysler intense pearl blue I'm changing the green seat it just dosen't do any thing for me

THANKS GUYS YOU GOING TO CUT THE RIMS AND STILL ABLE TO RUN FRONT BRAKES

THANKS TATS IT TOOK ME ABOUT AYEAR TO GET IT LIKE IT IS i LOVE IT i'M VERY PLEASE WITH MY WICKED ATV MOTOR IT HAULS ASS ONCE i LEARN HOW TO CONTROL IT i'LL START SPRAYING IT WITH SOME NOS

LET ME KNOW WHEN YOU GO DOWN TO ENGLISHTOWN WE WILL MEET UP IF YOU DON'T MIND ME ASKING WHY A 1 THUR 4 FOR ASPHALT WICKED MAKES A 1 THUR 6 THATS WHAT i GOT IT WORKS GREAT

BUMP

sweet see you down there who did your motor

175 + shipping

I hope we can its better then going down and doing time shots but it doesn't matter I'll be there every week with at least 2 other bike a raptor and another banshee even if they don't come out every week they will set it up day by day and give a trophy

that would be good once you run on the street you will not want the dirt come out this season it will be open 2 more times on sunday I think there will be a pay out at the end of the season if the turn out is good every week

some body got to want them the nozzles can be taken out very easly and plug the holes then you have a set of carbs and clamp ons for 175+ shipping

dynoedge racing does it probably both

no its reverse clyinders

englishtown next year wants to put in a class for the quads if they can get enough down there every sundays @ the 1/8 mile track bracket racingthey will set up a points bracket and everything even this year if there is enough down there they will set up a racing tree and race for a trophy.

I haven't use the nos yet still tiing to dial it in and get used to the override trannyon motor the fastest I went was 7.1 @ 92 leaving about 60 of foot prints on the track I still have to play with gearing and wheelie bar height I should get it in the 6.7 or 8 range with out nos it is a low compression motor built for nos 125 psi once I push the button I have a decent amount of nos being use I had to by a 5 lbs bottle so I can at least get 4 or 5 runs out of it

thanks nyuk

its a 4mm on alky and nos bike built by wicked atv 1 thur 6 override tranny so far just had it out twice let me know what you guys think http://www.wickedatv.com/DUportal30/pictures/DSC00145.jpg http://www.wickedatv.com/DUportal30/pictures/DSC00150.jpg http://www.wickedatv.com/DUportal30/pictures/DSC00156.jpg http://www.wickedatv.com/DUportal30/pictures/DSC00154.jpg http://www.wickedatv.com/DUportal30/pictures/DSC00148.jpg http://www.wickedatv.com/DUportal30/pictures/DSC00146.jpg

well there 4mm stroker with nos goes 5.6@122 in the 1/8 give them a call roger will hook you up and will give you any info that you need

I got mine from wicked it is a 2" wide rim they sell a couple of different designs with a scooter tire it is a spindle mount but it has a hub for the front brakes I think they are 600 with tires which isn't bad aluminum front hubs cost 300+ rims and tiers might cost 100 to 150. but it dosnot have the custom look of these http://www.wickedatv.com/DUportal30/pictures/wheel_knife.jpg http://www.wickedatv.com/DUportal30/pictur...force_small.jpg and check out these back rims http://www.wickedatv.com/DUportal30/pictur..._1051_small.jpg give roger a call tell him frank refered you he will hook you up thats all he does is asphalt racing

bump

wicked atv (714) 530-2215 ask for roger and tell him frank gave you the number he will hook you up they are in garden grove

I have 34 mm pj collecting dust in my shed they are gas carbs with the nos nozzles epoxied in them I also have th K&N air filter for them I'll get rid of them for 175 + shipping with the filters

my bike is finally 100% complete from last winters project only had it down the track once if someione can tell me hoe to psot them or post them for me that would be great

I'm a New York city union floor cover 2287 (carpet guy)

I would do that you don't run your bike there do you

they run on the street I'm only running on the track