justinklumb29

i never got your email i dont know if it is right on here. it is [email protected]

Iam going to be finishing my engine and dropping it in in the next couple of weeks. I have to go get some jets and was wondering around where i should be with gorr's wood port, fmf fattys, and boysen power reeds. Iam thinking somewhere in the 300's? Thanks Justin

Iam going to be putting my casses back together in about a week. Is there anything special I should know so I dont have to tear it down again. I took all the studs out, do i just screw them back in? how far?. Any tips and suggestions are appreciated THanks Justin

anybody got a set of either of these preferebally dmc?

Iam very much considering buying a set up these pipes. However I can not find any used ones and i would have to fork out around 500 to get a set of new ones. Are they worth it. Are they that much better that fatties or t-5's or pt mids. Iam talking about the ones where the silencers come together in the middle

Just wondering if anybody has an extra set up cylinder studs (connect jugs to the case). Mine are all junk and i dont really want to go to the stealership.

bump anybody got a pair of these pipes for sale

the guy who was gonna powder coat it told me to remove them, i will stop at some shops tommorow thanks

title says it, i was taking out the studs so i can get the cases powder coated and one of cylinder studs snapped off, i was using as easy out to get it out and that snapped off as well. How do i get it out??

Iam looking for an exhuast for my new shee, I want either ptr mids or the dmc pipes where they join at the silencer. let me know what you got

I tired the nut thing and one of the studs broke off. Do i just drill it out, or how do i get the rest of it out now

I got all of the studs that hold the cases together out fine, but i can't get the cylinder studs out. Is there any tricks or anything.

no body has any ideas, iam goona set my parts out soon and still have very few ideas on a color scheme

I got my banshee completly tore down and cant deciede on any color schemes. One of my ideas i thought about for a while was silver frame, oragne plastic, light blue cases and aarms, and polished cylinders. Any other ideas?!?!

Iam tearing my motor down and was wondering if there is any way to remove the clutch basket without the special tool THanks Justin

Hey, My silencer for my dynoprt 2 into 1 pipe need to be repacked, I was wondering where I can find packing and how you repack it THanks Justin

i know that those arent the only two guys, however i have narrrowed it down to them two as i have heard great things about both of them(not saying they are the only great ones). Eric is also very affordable and i have not heard one bad thing about him. I have checked out some of the other websites, partiot, twister and some other ones and none of them really interested me that much. Thanks for all the replies and i will let you know who i choose when i choose Justin

my shee did this a while back, i tried all different jets, then one day i took the prefilter off the filter and it has ran great ever since. if you have a prefilter try running without it or clean your air filter.

thanks for all the replies, I think that iam leaning towards eric a little bit, I will give him a call tommorow and talk to him

I am just about ready to send my cylinders out, but cant deciede between the two, eric is cheaper but is his work cheaper?. Iam going to be looking for a trail port (low to mid range) Its more than likely going to be run with fattys and maybe a two into one carb.

how do you actually polish them, i was thinking of trying it myself

$375 for asr aarms sounds kinda high, on ebay they go for around there brand new, anyone esle

the pipe sounds awsome, i just got one with my new banshee, however it does not perform as well as dual pipes, but mine as beat up so that could be why, but it is one of the best sounding pipes i have ever heard Justin

its a dynoport and i dont think iam gonna sell it, its pretty beat up, and there is a small crack where the two pipes come into one, I was wondering if you could just weld over this?

I just got another banshee yesterday, pretty much stock(for now) except a 2into1 pipe and lonestar axle, The shee is pretty beat up and has been raced, anyways it has a fresh top end, starts up first kick, but with the 2into1 pipe it sounds AWESOME, however it does not perform well, my brothers stock banshee can take it in a drag, it feels like there is no bottom end at all, only once you get in the power band will it go. But for being piped it is not that fast. It also seems like it is jetted right, no bogs or sputters. So, i do not think this pipe is that good for performance.