rzbanshee

I'm running this ignition and the only way I could get it to work correctly was to run a battery, since I was using the rz350 stator assembly is wasn't a big deal. Email questions to g.stice@mchsi.com and hopefully I can help you out.

Banshee cdi won't work... The cdi is usually the most expensive part of the swap. I got tired of my powervalve controllers crapping out and went with the zeel unit. I know that you said you weren't going to use it but it awesome compared to the yamaha crap. If you want a cheap power valve motor like 20 bucks or cheaper, pretty much any exhaust servo motor off yamaha bikes will work if you change the connector, ex. r1, r6 , & some others. Just remember that pretty much any year cdi will work with any year stator, you just have to flip a couple wire to make certain swaps. I might have an extra cdi laying around, I'll look for ya. Marcus

Here a copy of the stock rzwiring http://www.keystonegarageclub.com/rztech/i...s/RZ350-7-1.jpg

Another..

This is well work the money..Awesome unit.

Here is how I mounted mine. Bike still in mockup but running.

I don't know how long it good for. I'll be probably be selling cheap, would be awesome for someone that is making there own biodiesel.

Bought a drum of vp methanol with top end lube 2 yrs ago and only used around 10 gallons before I sold the bike running it. It has since been in sealed up in storage off the floor. I need to get it gone before if goes bad. Any offers considered. Must be picked up in Burlington,kS 60 miles straight south of Topeka. Thanks

Here a link to some part I put on ebay, brand new hotrod 4mm stroker crank bought and welded from fast racing also a very nice set of paul turner midrange pipes. http://search.ebay.com/_W0QQsassZsticefamQQhtZ-1

Me too, thanks!!

PM with parts and prices Missing Banshee Parts so far Front bumper Front beadlock rims Front/Rear shock covers Radiator hoses Ignition coil Headlights Thumb throttle/cable Rear grab bar Rear beadlock rims Rear hauler paddle tires Rz350 power valve servomotor/ cables-motor purchased Rz350 power valve pulley housing Rz350 power valve pulley Rz350 power valve connector Delta v-force 3 reeds Pwk 35mm carb/ airfilter K&K graphics kit/seat cover Almost every nut/bolt for assembly Parts damaged/Needs replaced Blown motor- Had a totals of 5 hrs. on fresh topend Longrod crank New cylinder sleeve-purchased Sleeve needs bored/ report matched .010 weisco piston set Wristpin bearings 4 base gaskets due to spacer plate 4 intake gaskets Crank seals 17cc coolhead dome Rz350 coolhead o-ring kit

I need 1 stock sleeve, idiots who stole my shee blew it up and broke a chunk off the liner above the exhaust port. Let me know if anyone has one, just want to see before I buy one off the web.

Went and picked up by banshee pieces from the sherriff yesterday. Here is a link to what it used to look like, http://www.bansheehq.com/forums/index.php?...topic=53347&hl= They pretty much stripped the whole thing to make it look like a different bike, plus spray painted everything white. I am very happy to get back what I got, but its probably going to take 2000 to 3000 dollars to put it back together. It had an built rz350 motor in it and thats how I ended up identifing it, due to the dumb assed didn't know what they really had. They did manage to blow the motor up, in the progress break the cylidner liner right above the exhaust port. So right now I am in the search to find a banshee liner which will work for the rz because I am going to have to pay my engine builder even more money to match the new sleeve to the port job he did 1 month before it was stolen. If anyone else knows where I can get a sleeve cheap let me know, I plan on putting before and after pictures in the images sections, and the 50+ parts is is going to take to put my bike back together in the wanted section. I just hope the guy that stole it gets what he has coming to him!!

Sorry I want to buy the highs, but would be willing to trade if the right deal came across.

Have a mint set of chromed paul turner midranges that sign off a little too early for my ported rz jugs. Want the high rev. Have paypal.