tooantc Posted July 19, 2008 Report Posted July 19, 2008 My banshee has been sitting for a long while and now I am starting to put some love back into it. I want to get a cool head with domes but I don Quote
jbooker82 Posted July 19, 2008 Report Posted July 19, 2008 With the stock head on bend a pice of solder in the shape of an L. Put it in through the spark plug hole so it touches the cylinder wall. You want to go paralled with the wrist pin in the piston. Roll the motor over by hand. It will smash the solder and that is your squish clearance. You could aslo get a measure ment by using a dial calipar. You know the long part that comes out of the handle when you opean the calipar up. Talk to david noss at www.nossmachine.com He makes cool heads and domes. He will be able to fix you up. BHQ members get 10% off too. josh Quote
rubberneck Posted July 20, 2008 Report Posted July 20, 2008 My banshee has been sitting for a long while and now I am starting to put some love back into it. I want to get a cool head with domes but I don Quote
tooantc Posted July 20, 2008 Author Report Posted July 20, 2008 Well I took it apart with out checking the squash. So I guess it going back together. I could defiantly see the piston sticking out of the top of cylinder. Thanks for replying Quote
rubberneck Posted July 20, 2008 Report Posted July 20, 2008 The more i think about it, you probably can get away without putting it back together. If you give the person who is cutting the domes the amount the piston sticks out, they should be able to cut them the way you need them. Quote
dlnoss Posted July 20, 2008 Report Posted July 20, 2008 Yes, if you can get a good measurement of how far the edge of the piston is above the cylinder at TDC, and know what style piston you have (Blaster or Banshee). -David Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.