skat trak hauler

[blanco25]

I just picked up some 22x11x8 skat trak ultra buffs with extreme cupps. What tire pressure should i run in them? this is for hillshooting.

[Wildcardracing]

I usually run mine at about 3psi depending on sand condition. If the sand is real heavy or damp, I'll put as much as 5 in them so they don't hook quite as hard.

[Bansh-eman]

i run 4 psi in all types of sand

[flyhighprerunner]

i say depending on sand conditions between 3-5 but usually around 4 is were i like to stay

[Stellar Performance]

What you need to be more concerned about is for what kind of riding. I assume that if you are running buffed tires...its for drag. There is no real set answer to what psi you should run them at. The great thing about buffed haulers is that you can change your gearing by adding or subtracting air. The higher the pressure...the more the tire balloons...the taller the gearing.....less air....smaller tire....lower gearing. Every time I have talked to Jon over at sandtoyz, they start everyone of there new bikes with about 7 psi and work down from there. It is simply a starting point and thats it. The lower the psi....the better the traction, but depending on your setup and abililty to ride....traction is not always a good thing.