kwickez Posted June 5, 2008 Report Posted June 5, 2008 can i take out all the tors stuff without the kit and be fine?and just get the kit later? Quote
Bill Posted June 5, 2008 Report Posted June 5, 2008 Yep just unplug the little black box under the tank. Quote
JasonsBanshee Posted June 5, 2008 Report Posted June 5, 2008 Yea, that's what I did. I unplugged the box under the tank on the left hand side. Quote
kwickez Posted June 5, 2008 Author Report Posted June 5, 2008 Yea, that's what I did. I unplugged the box under the tank on the left hand side. can i pull the black box off and toss it?also what about the tors stuff inside the throttle housing(spring i think it is)? Quote
fastbanshee8 Posted June 5, 2008 Report Posted June 5, 2008 The black box is the only part you can remove, until you get the kit to replace the carb caps, and the idle adjustment screws. Quote
JasonsBanshee Posted June 5, 2008 Report Posted June 5, 2008 The blocks on top of the carbs will have to stay unless you get the kit. If you get the kit make sure you get the complete kit to drill and tap the carbs for the idles screws. Yes, you can unplug everything but no you can't remove the tops without the kit with new caps. My 13 year old nephew rides my Banshee every now and then so when he rides it or anyone else that I don't feel would know what to do if the throttle stuck then I plug it back in. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.